771701
2
Zoom out
Zoom in
Previous page
1/2
Next page
DB200 Signaler, larger of the 2 units:
The speaker switch allows you to turn the
Audio Alarm ON or OFF. ON is up and
OFF is Down.
The Dip Switches 1-6 should match the DB Sensor Dip
switches 1-6. The factory setting is 1 thru 3 ON and 4 thru
6 OFF. The 7th and 8th switches are not active switches and
it will not matter if they are set to ON or OFF, unless your
using 2 sensors one for the front and one for the back door.
If you need to change the dip switch settings to avoid
interference with your neighbors, make sure both units
settings match.
Dip Switch settings DB 200
Figure 1.1
Multi-Function-Input Jack:
Located on the left side of the DB Sensor, this input jack is for
installations as shown in diagram 2 & 5.
Troubleshooting & Help:
If you’ve followed the directions and are still having problems
please try the following suggestions:
1) Check battery in the sensor, must be an 9 volt alkaline type.
2) Check that dip switch settings 1-6 match both the sensor and
the signaler as shown in figure 1.1 above.
3) Check outlet for power.
4) Move the Signaler to an outlet closer to the sensor unit.
5) If using the Multi-Function input jack make sure that the wires
are not touching each other. See diagram number 2 & 5 for proper
installation.
6) Check Function setting switch for proper position.
7) For Technical help call 1-248-577-5400, M-F 7:30 a.m.- 6:00
p.m. Eastern time. Or e-mail us with your questions at
info@sonicalert.com
Warranty:
Thank you for purchasing this high quality Sonic Alert product, we
hope you will have many years of satisfied use. All Sonic Alert
products come with a limited 5 year warranty so please retain
your receipt in safe place for possible future reference, you will
need in the event of warranty service.
Sonic Alert, Inc.
1050 East Maple Rd.
Troy, MI 48083
V/TTY 1-248-577-5400 fax 248-577-5433
e-mail: info@sonicalert.com
Web Site: www.SonicAlert.com
See all our product offerings at:
www.SonicAlert.com
Or call for a free catalogue 1-248-577-5400 V/TTY
REV 1.1
on
off
1 2 3 4 5 6 7 8
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sonic Alert DB200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sonic Alert DB200 in the language / languages: English as an attachment in your email.

The manual is 0.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info