474217
5
Zoom out
Zoom in
Previous page
1/27
Next page
Preparations of Installation
4
Safety instructions
The power cable supplied with the control unit may only be
used for the installation of the drive systems. After completion
of the installation, disconnect the cable and replace it with a
duct-laid cable. It is forbidden to use the supplied power cable
for standard operation of the gate.
The control unit may only be connected to the power supply by a quali-
fied electrician.
Always comply with the instructions in this manual.
Locking devices (electrical keys, locking bolts, etc.) must be removed and
disabled prior to installation of the dive system.
Ensure that the gate wings are properly secured to the posts as consid-
erable forces are applied to the devices during opening and closing of
the gate.
Prior to welding of fittings to posts or gate wings, remove or cover the
drive unit to prevent damage from sparks, etc.
If the gate is operated by means of a switch, it must be installed at a
minimum height of 1.6 m above ground to prevent inadvertent activation
by children.
In public areas, use only approved fittings and securing devices (e.g.
dowels).
Tools required
Supplied Components
Prior to installation, check delivery to ensure that it contains all neces-
sary parts.
Depending on the design of your drive system, the delivery might deviate
from the standard delivery.
Complete installation kit 1 wing 2 wing
Weight 9.1 13.8 kg
Packaging (L x W x H): 800 x 200 x 220 mm
Installation and operating instructions 1 x 1 x
Drive unit including cables 1 x 2 x
Control system, in housing 1 x 1 x
(with radio receiver, transformer and mains plug)
Remote control device including battery 1 x 1 x
Gate wing fittings 1 x 2 x
Post fittings 1 x 2 x
M10x45 stainless steel hexagon screw 2 x 4 x
M10 stainless steel locking nut 2 x 4 x
Plug 2 x 4 x
Downloaded from www.Manualslib.com manuals search engine
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Twist 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Twist 200 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Twist 200

Sommer Twist 200 User Manual - German - 29 pages

Sommer Twist 200 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info