566224

Soba BABYDUCK WA210 Manual

3
Zoom out
Zoom in
Previous page
1/28
Next page
16.
Empty any pockets that could contain coins, screws or other objects that could damage the wash-
ing or the machine.
17.
Put small items like socks in a washing bag or a pillow case to ensure they cannot get trapped
between the tub and the drum.
18.
Use a low foaming, high quality detergent. Never exceed the quantity recommended by the de-
tergent manufacturer. Using too much detergent is not good for your laundry and is hostile to the
environment.
19.
Leave the door open when the washing machine is not in use to reduce wear on the seal and pre-
vent mould formation.
20.
Do not put anything heavy on the machine that could damage the top.
Never let children play with the appliance.
I. INSTALLATION
1.
Removing the accessories
Open the door by pulling on the handle and remove the accessories in the drum prior to installa-
tion.
2.
Transport grip-safe pieces
All the pieces inserted to hold the drum steady during transport must be removed before using
for the first time.
Proceed as follows:
Unscrew and remove the three screws (A) fixed on the top cover, pull it forward and outwards.
Unscrew and remove the two nuts (B), remove the polystyrene then replace the cover (C).
N.B.
It is advisable to keep the packaging and transport holding pieces in case the machine has
to be transported again.
A
A
B
B
C
C
3.
Positioning
Install the machine on a firm, flat surface. Make sure that nothing – carpets, cloths etc., can pre-
vent the air from circulating around the machine. Make sure that the machine is not touching a
wall or any piece of furniture as this would cause vibrations.
Level the machine by screwing the adjustable feet up or down; never place a piece of wood or any
other object underneath to set off any difference in height between one side and the other. Once
the machine is level, tighten the counter nuts on the feet.
4.
Connecting to the water supply
The appliance may only be connected to the cold tap. Screw one end of the cold water intake hose
to the threaded connection point at the back of the appliance and connect the other to the cold
water tap. The machine is designed to work with a water pressure of 0.5 to 10 bar. Check that the
connections are watertight.
3
AUTOMATIC WASHING MACHINE BABYDUCK WA210
INSTRUCTION MANUAL
3 …


Need help? Post your question in this forum.

Forumrules
1

Forum

soba-babyduck-wa210

Reset search

  • Is there a fuse in a soba washing mch the mch won't start after all the checks from the manual Submitted on 11-3-2017 at 04:58

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soba BABYDUCK WA210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soba BABYDUCK WA210 in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info