619731

Snooper STP1400 Tyre Pilot Manual

6
Zoom out
Zoom in
Previous page
1/9
Next page
Monitor Parameter Display
The display can show current tyre pressure and temperature.
By default the unit will display the current tyre pressures, to view the temperature
press the SET button and the temperature will be displayed for 10 seconds before
the unit reverts back to displaying the tyre pressures.
Alarm Status
High Pressure/Low Pressure/High Temperature/Fast Leakage/Sensor Low
Battery Alarm
The user interface will monitor the pressure and temperature of 4 tyres simultaneously.
When the low pressure value is exceeded display will indicate corresponding alarm
icon ( , ) and the unit will beep. Press SET once will stop the alarm sound , the
flashing icon can only be stopped when tyre problem is resolved.
Factory default alarm setting:
Step to restore factory default setting: press and hold SET key and plug the
console into the cigarette lighter power socket until Bi... sound to confirm factory
setting was restored.
10 • UK
10 seconds
High Pressure Alarm level 3.0 Bar (44 PSI)
Low Pressure Alarm level 2.0 Bar (29 PSI)
High Temperature Alarm level 70 °C
High Pressure Alarm
e.g. Left Front tyre pressure reached 3.1Bar, display showing alarm with
(Bi…Bi…Bi…) sound as shown.
Low Pressure Alarm
e.g. Left Front Tyre pressure reached 1.9 Bar, display showing alarm with
(Bi…Bi…Bi…) sound as shown.
High Temperature Alarm
e.g. Left Front tyre pressure reached 71°C, display showing alarm with
(Bi…Bi…Bi…) sound as shown.
Fast Leakage Alarm
If a fast leak is detected the icon, on the display, will begin to flash and the alarm
beep will sound.
To silence the alarm press the SET button, the flashing icon can only be stopped
once the fast leak is resolved.
e.g. Left Front tyre pressure dropped from 2.4 Bar to 2.1 Bar, fast leakage display
as shown.
11 • UK
Pressure Reading flashing
Alarm Status icon flashing
Pressure Reading flashing
Alarm Status icon flashing
Pressure Reading flashing
Alarm Status icon flashing
Pressure Reading flashing
Alarm Status icon flashing
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper STP1400 Tyre Pilot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper STP1400 Tyre Pilot in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info