619690
13
Zoom out
Zoom in
Previous page
1/14
Next page
12
Caution: If you must use pliers to loosen the ring, be careful not to crush
the tip. Never use pliers or other tools to retighten the ring on the
cigarette lighter plug.
2. Pull the ring straight out, then remove the metal tip, spring and old
fuse.
3. Check the fuse to see if it has blown. If it has, replace it.
4. Replace the metal tip and spring inside the ring, then place the fuse
inside the cigarette lighter plug and screw the ring back onto the
plug. Make sure the metal tip is visible when you reassemble the
cigarette lighter plug.
Direct connecting/hard wiring your S3 neo.
You can power your Snooper S3 by wiring it directly to your vehicles 12v
electrical system using the ’Hard Wire’ cable supplied as standard with
your unit. Firstly connect the positive side of the cable (Red) to a 12v
switched live. This is a live that is On when the ignition is On and Off
when the ignition is Off. The negative side of the lead should be
connected to a negative ground, so can be attached to any metal portion
of the vehicles frame. Next plug the small adaptor on the other end of the
lead into the DC 12V input socket on the back of the unit.
Important: If you are unfamiliar with this procedure, please consult a
professional auto electrician
15
3. S100-RLD External Installation
As the S100-RLD is waterproof it can be mounted outside the vehicle
with the ’L’ shaped bracket, water resistant double sided tape and screw
pack provided.
- Find a suitable mounting position for the detector, ensuring that the
front of the unit has a clear view of the road ahead and is unobstructed
by any metallic objects and that there is a sufficient mounting area to
attach the ’L’ shaped fixing bracket. The S100-RLD needs to be
mounted in as horizontal a position as possible so that it is looking
directly down the road ahead but can be mounted either flat or on it’s
side if necessary. We recommend that you mount the detector either
behind the vehicles grille (If the openings of the grille are at least 10mm
in diameter) or within an air intake at the front of the vehicle. The S100-
RLD can be mounted anywhere at the front of the vehicle, but for
optimum performance we suggest you mount it as close to the
number plate of the vehicle as possible.
- When you have found a suitable location, using the ’L’ shaped mounting
bracket as a template, drill between 2 and 4 pilot holes into the selected
mounting surface for attaching the bracket using either the self-tapping
screws or the nuts and bolts provided.
You will need to attach the bracket using
at least 2 screws or 2 nuts and bolts to
ensure that the bracket is well secured.
Remember that there is a lot of
vibration within the engine bay
so it is very important that the
S100-RLD mounting bracket
is secured correctly.
Typical Fitting
10mm
Minimum
Typical Fitting
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper S3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper S3 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info