809888
67
Zoom out
Zoom in
Previous page
1/68
Next page
67
v1.03
M215SC User Manual Appendix 1 - Base Station Settings
1. Click Choose le and select the le from your PC or server.
2. Click Import.
To remove the installed certicate, click Remove custom certicate.
Trusted Certicates.
Trusted Certicates are for server authentication with secured HTTP transaction in the following
applications: SIP signalling, Provisioning, Firmware, and LDAP directory service. Up to 20 trusted
certicates can be installed.
Trusted certicates can be protected from selection for deletion and from removal during a reset to factory
values.
To import a le, click Choose le, select the le from your PC or server, and click Import.
To delete an installed certicate, click the box to its left. Click Delete selected entries and Save.
To protect a trusted certicate, click the box to its right and Save.
TR069
The Broadband Forum’s Technical Report 069 (TR-069) denes a protocol for remote management and secure
auto-conguration of compatible devices. On this page, you can congure access to an auto-conguration
server (ACS).
Setting Description
Enable TR069 Click the box to enable the TR-069 subsystem.
ACS username User name for ACS authentication
ACS password Password for ACS authentication
ACS URL URL used to contact the ACS, for example, http://my.acs:9675/path/to/somewhere/
Enable periodic inform Click the box to enable Periodic Inform calls.
Periodic inform interval (seconds) Enter the interval for Periodic inform method calls in seconds. The default is 3600.
Connection request username If the ACS wants to communicate with the device, it must oer the matching
connection request user name. The user name is contained in the rst report the
device sends to ACS.
Connection request password If the ACS wants to communicate with the device, it must oer the matching
connection request password. The password is contained in the rst report the
device sends to ACS.
System Logs
Under Syslog, you can enter settings related to system logging activities. It supports the following logging
modes:
Syslog server
Volatile le
Settings Description
Enable Syslog Enable log output to syslog server.
Server address Syslog server IP address.
Port Syslog server port.
Log Level Sets the log level. The higher the level, the larger the debug output.
5—ALL
4—DEBUG
3—INFO
2—WARNING
1—ERROR
0—CRITICAL
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snom M200SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snom M200SC in the language / languages: English as an attachment in your email.

The manual is 7.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Snom M200SC

Snom M200SC User Manual - German - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info