332153
10
Zoom out
Zoom in
Previous page
1/12
Next page
Instructions for assembly
GB
21
Instructi ons for assembly
Safety instructions for the kitchen fitter
Veneers, stuck-on or plastic surfaces of surrounding furniture
must be temperature resistant (>75°C). If the veneers and sur-
faces are not sufficiently heat resistant they can become defor-
med.
Ensure that all live connections are safely insulated when
installing the hob.
Cover strips between the wall and the worktop behind the hob
which are made of solid wood are permissible as long as mini-
mum clearances in accordance with the installation diagrams
are maintained.
Minimum clearances of the hob cut-out towards the rear are to
be maintained in accordance with the installation diagram.
For installation directly next to a tall cupboard, a safety dis-
tance of at least 40 mm. The side surface of the tall cupboard
should be fitted with heat resistant material. Due to working
requirements, however, the distance should be at least 300
mm.
The clearance between the hob and an extraction hood must
be at least as large as that stipulated in the assembly instruc-
tions for the cooker hood.
The packaging materials (plastic foil, polystyrene, nails etc.)
must be kept out of reach of children as these parts are poten-
tially dangerous. Small parts can be swallowed and there is a
danger of suffocation.
Installation
Important
If the cooking surface is located above furniture parts (side
panels, drawers, etc.), then an intermediate bottom must be
inserted at a minimum distance of 20 mm in order to prevent
accidental contact with the underside of the cooking surface.
The intermediary shelf may only be removed by tools.
To avoid danger of fire, make sure that no combustible objects
which could easily catch fire or become deformed on exposure
to heat are directly next to or above the surface.
Sealing of cooking zone
Before installation, correctly insert the sealing unit delivered with
the hob.
In addition, make sure that no liquids can penetrate between
the edge of the hob and the worktop or between the hob and
the wall and come into contact with any electrical appliances.
When installing a hob into an uneven worktop, e.g. with a cera-
mic or similar covering (tiles etc.), the seal on the hob is to be
removed and the seal between the hob and worktop made with
plastic sealing materials (putty).
The hob must under no circumstances be sealed with sili-
cone sealant!
This would make it impossible to remove the
hob at a later date without damaging it.
Ventilation
The back wall of the cabinet must be open in the area of the
cut-out in order to provide for air circulation.
The front transverse strip of the furniture must be removed so
that an opening is provided for air flow underneath the worktop
over the entire width of the unit.
Remove any transverse strips underneath the worktop at least
in the area of the worktop cut-out.
The distance between induction hob and kitchen furniture
resp. built-in unit must provide for sufficient ventilation of the
induction.
The ventilation openings must be thermically devided with the
attached screen shield. Thus a back-flow of warmed air is pre-
vented from entering the cool air intake.
Attention!
The screen shield must not cover the ventilation openings. If
necessary, shorten the shield up to the furniture or built-in unit.
Avoid excessive thermal development from below e.g. from a
baking oven without a cross flow cooling device.
The induction hob may not be used when pyrolysis operation
is taking place in a built-in oven.
Insulation
Insulation
Bottom of the hob
Front
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg se2732id at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg se2732id in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg se2732id

Smeg se2732id User Manual - German - 12 pages

Smeg se2732id User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info