334666
3
Zoom out
Zoom in
Previous page
1/10
Next page
12 223175
1. Operations
1.1 Your new hob with Touch-Control operation
SE2644TC SE2642TC SE2645TC SE2756TC
Cooking zone 14.5 cm 14.5 cm 14.5 cm 18 cm
(Two-circuit) cooking zone 12/18 cm 18 cm 12/18 cm 12/21 cm
Cooking zone 14.5 cm 14.5 cm 14.5 cm 14.5 cm
(Two-circuit) cooking zone 18/21 cm 21 cm 18/21 cm 18/26.5 cm
Fryer
1.2 Touch-Control operating panel
After the supply voltage has been connected (mains connection), a self-test is carried out which is concluded when
a short acoustic signal is to be heard.
1
On/off switch (control)
2
Locking key
3
Control lamp lock (control)
4
Timer key
5
Time display
6
Timer control lamp
7
Minus key
8
Plus key
9
Twin circuit key
0
Cooking zone key
!
Control lamp for switching on the twin circuit
"
Cooking level display
§
Readiness point for cooking zone
(lit: cooking zone can be used)
1.3 Touch-Control operations
Each key operation is always confirmed by an acoustic signal.
Pressing the on/off switch key
1 switches on the control system: Put your finger on the button until a "0" lights up
at all of the cooking level displays and the cooking zone standby dot
§ flashes. The next action must be carried
out within ten seconds, otherwise the control system will automatically switch off again.
To switch on a cooking zone, press the corresponding cooking zone key
0 of the required cooking zone. The
appropriate stand-by dot cooking zone
§ of the activated cooking zone lights up.
Select a cooking level from 1 to 9 by means of the minus or plus keys
7/8. When switched on, each cooking zone
can be switched off again at any time. To do this, the required cooking zone must be activated, the stand-by dot
§
lights up.
The minus key
7 can be used to turn the cooling level down to "0"; if the minus and plus keys 7+8 are pressed
at the same time, the cooling level can be switched off directly.
In all cases the complete control system can be switched off at any time by pressing the on/off key
1: To switch
off the entire cooking range place your finger briefly on the on/off switch until the control lights go out.
Pressing locking key
2 prevents all the keys - with the exception of the on/off key - from being operated by
mistake. Successful locking is indicated by the control lamp
3. Pressing the locking key 2 cancels this command
again.
Residual heat display
The residual heat display is an illuminated "H" on the appropriate cooking level display ".
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg se 2644 tc at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg se 2644 tc in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg se 2644 tc

Smeg se 2644 tc User Manual - German - 10 pages

Smeg se 2644 tc User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info