131397
7
Zoom out
Zoom in
Previous page
1/8
Next page
12
Electric connection (ONLY for UK)
WARNING:
THIS APPLIANCE MUST BE EARTHED
The mains lead of this appliance is fitted with a
BS 1363 5 amp fused plug.
To change a fuse in this type of plug use an
A.S.T.A. approved fuse to BS1362 type.
1. Remove the fuse cover and fuse .
2. Fit replacement 5A fuse into fuse cover.
3. Refit both into plug.
IMPORTANT: The fuse cover must be refitted
when changing a fuse and if the fuse cover is
lost the plug must not be used until a correct
replacement is fitted.
Correct replacements are identified by the
colour insert or the colour embossed in words
on the base of the plug.
Replacement fuse covers are available from
your local Electricity Board Shop.
HOW TO CONNECT AN ALTERNATIVE PLUG
If the fitted plug is not suitable for your socket
outlet, then it should be cut off and disposed of
in order to avoid a possible shock hazard
should it be inserted into a 5A socket elsewhere.
A suitable alternative plug of at least 5 Amp
rating e.g. 5 Amp round pin to BS 546 should
then be fitted to the cable.
The wires in this mains lead are coloured in
accordance with the following code:-
BLUE – “NEUTRAL” - “N”
BROWN – “LIVE” - “L”
GREEN AND YELLOW – “EARTH” - “E”
1 The GREEN AND YELLOW wire must be
connected to the terminal in the plug which
is marked with the letter “F” or by the Earth
symbol or coloured green or green and
yellow.
2 The BLUE wire must be connected to the
terminal which is marked with the letter “N”
or coloured black.
3 The BROWN wire must be connected to the
terminal which is marked with the letter “L”
or coloured red.
Systems available
Two systems are available:
Exhaust mode
Vapours are extracted outside through an
exhausting pipe that is affixed to the connection
ring above the hood.
Diameter of the exhausting pipe must be equal
to that of the connection ring.
In the horizontal runs the duct must be slightly
slanted (about 10°) and directed upwards to
vent the air easily from the room to the outside.
Attention!
If the hood is supplied with carbon filter,
then it must be removed.
Filter version
The air is filtered through a carbon filter (for its
installation see paragraph "Carbon filter") and
recirculated into the room.
Attention!
If the hood is not supplied with carbon filter,
then it must be ordered and mounted.
This version is used when there is no exhaust
duct for venting outdoors or when it is impossible
to install one.
Important:
For the 74,8 cm hood (Fig. 6-7)
Before using the hood, ensure that the inside
grids (G-Fig. 8)are open (Exhaust mode) or
closed (Filter version).
GB
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg kseg 55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg kseg 55 in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg kseg 55

Smeg kseg 55 User Manual - German - 8 pages

Smeg kseg 55 User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info