75009
26
Zoom out
Zoom in
Previous page
1/27
Next page
Instructions for the Installer
55
15.INSTALLING THE APPLIANCE
15.1 Electrical connection
The nameplate with the technical data, serial number and mark is in a visible position on the oven door
surround.
The nameplate must never be removed.
The appliance must be connected to earth in compliance with electrical system safety regulations.
If a permanent connection is used, the appliance's power supply line must be fitted with an omnipolar
breaking device with contact gap of at least 3 mm, located in an easily accessible position close to the
appliance itself.
If a socket and plug connection is used, check that they are of the same type. Do not use reducers,
adapters or junctions since they may cause overheating or burns.
Operation at 220-240 V~: use a type H05V2V2-F three-wire cable
(cable of di 3 x 1.5 mm
2
).
The earth wire (yellow-green) must be at least 20 mm longer than
the other wires at the end for connection to the appliance.
If the power supply lead has to be replaced, remove the rear casing by undoing the screws as shown
below. Tpower lead gauge must be at least 1.5 mm
2
(3 x 1.5 cable) and it must withstand temperatures
up to 90°C (H05V2V2-F). Make sure that the cables follow the best possible route and use band clamps
to fix them at the side of the cabinet, to avoid any contact with the oven.
26


Need help? Post your question in this forum.

Forumrules
1

Forum

smeg-fp-160-x

Reset search

  • Hi I have a Smeg 150x.
    I bought one secondhand but after I installed it the analogue came on but I could not adjust the time, temperature or function. Submitted on 22-1-2023 at 12:52

    Reply Report abuse
  • Good day
    I have a Smeg 150x which I bought with a secondhand kitchen.
    After installing the analogue lit up but no functions would work
    I depressed the button for setting the time but the- and + buttons made no difference
    Nothing happens when I turn the 2 large knobs for the temp and function.
    Submitted on 22-1-2023 at 12:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg FP 160 X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg FP 160 X in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg FP 160 X

Smeg FP 160 X User Manual - German - 27 pages

Smeg FP 160 X User Manual - Dutch - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info