682757
27
Zoom out
Zoom in
Previous page
1/32
Next page
27
EN
PROBLEM POSSIBLE CAUSE REMEDY
The coee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot water
(Please note! the hot water function can be
used).
The infuser has cooled down because
2/3 minutes have elapsed since the last
coee was made.
Before making the coee, heat the infuser by
rinsing using the rinse function
(see par. "Rins-
ing ").
A low coee temperature is set.
Set a hotter coee temperature in the menu (see
par. "Coee temperature " ).
The coee is weak or not creamy
enough.
The coee is ground too coarsely. Turn the grinding adjustment dial one click an-
ticlockwise towards number 1 while the coee
mill is in operation (g.11). Continue one click
at a time until coee delivery is satisfactory.
The eect can only be noticed after delivering
2 coees (see par. "Adjusting the coee mill").
The coee is unsuitable. Use coee for espresso machines.
The coee is delivered too slowly or a
drop at a time.
The coee is ground too nely. Turn the grinding adjustment dial one click
clockwise towards number 7 while the coee
mill is in operation (g.11). Continue one click
at a time until coee delivery is satisfactory.
The eect can only be noticed after delivering
2 coees (see par. "Adjusting the coee mill").
Coee does not come out of one or
both of the spouts.
The coee spouts (A13) are blocked. Clean the spouts with a toothpick (g.30).
The appliance is not producing coee The appliance detects impurities in its
system: the display shows "CLEANING
IN PROGRESS".
Wait for the appliance to be ready for use again
and reselect the required beverage. Contact
an Authorised Customer Service Centre if the
problem persists.
The appliance does not come on It is not plugged into the socket. Plug into the mains socket (g.1).
The main switch (A21) is not turned on. Press the main switch (g.2).
The infuser cannot be extracted The appliance has not been turned o
correctly
Turn the appliance o by pressing the
button (A19)
(see section “Turning the appliance
o”).
At the end of de-scaling, the appli-
ance requests a third rinse
During the two rinse cycles, the water
tank (A12) was not lled to the MAX
level
Follow the instructions displayed by the appli-
ance, rst emptying the drip tray (A14) to avoid
the water overowing.
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services Technical Assistance.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg CMS4604NR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg CMS4604NR in the language / languages: English as an attachment in your email.

The manual is 13,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg CMS4604NR

Smeg CMS4604NR User Manual - German - 32 pages

Smeg CMS4604NR User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info