479618

Smeg BL-1 Manual

29
Zoom out
Zoom in
Previous page
1/29
Next page
Cod. 913531026
Diese Wascheinheit verfügt über eine Einrichtung für die waagrechte Ausrichtung
des Geräts nach dem Aufstellen.
1. Die untere rechte Schublade herausnehmen. Man muss sie hierzu wie bei einer
gewöhnlichen Schublade ganz herausziehen und anheben (Abb. 1).
2. Das untere Sockelblech entfernen. Man muss es hierzu nach oben und dann nach
außen ziehen (Abb. 2).
3. Mit einem 10mm-Steckschlüssel die Sechskantmuttern (siehe die nebenstehende
Abbildung) ein- bzw. ausschrauben, um das Gerät waagrecht auszurichten (Abb. 3).
4. Das Sockelblech wieder anbringen. Hierzu muss man zuerst die beiden Schrauben
unten einführen und dann das Sockelblech mit den beiden oberen Schrauben fest
klemmen (Abb. 4)
Dit wasblok is uitgerust met een inrichting waarmee na de plaatsing de
horizontale stand van het apparaat kan worden geregeld.
1. Trek de lade rechtsonder er volledig uit en til hem op als een normale lade (Fig.1).
2. Verwijder de onderste plint door hem eerst naar boven en vervolgens naar buiten te
trekken (Fig.2).
3. Draai, met een pijpsleutel nr. 10, de zeshoekige moeren, zoals afgebeeld in de figuur
hiernaast, tot het blok goed vlak op de vloer staat (Fig.3).
4. Plaats de plint weer terug waarbij u er voor moet opletten dat u eerst de twee schroeven
onderin plaatst om hem vervolgens met de twee schroeven bovenin vast te klemmen
(Fig. 4)
Este bloque de lavado está equipado con un dispositivo que permite regular la
planaridad del aparato una vez posicionado.
1. Tire el cajón inferior derecho retirándolo completamente de su lugar y levantándolo
hacia arriba como si fuese un cajón común (Fig. 1)
2. Retire el zócalo inferior, extrayéndolo primero hacia arriba y luego hacia afuera (Fig. 2);
3. Con una llave tubular de 10 gire las tuercas hexagonales, ilustradas en la figura de al
lado hasta obtener la planaridad respecto al pavimento (Fig. 3);
4. Vuelva a montar el zócalo teniendo cuidado de colocar los dos tornillos inferiores y de
encajarlo luego con los dos tornillos superiores (Fig. 4).
Este bloco de lavagem possui um dispositivo que permite regular o nivelamento
horizontal do aparelho após a sua colocação.
1. Puxe a gaveta inferior direita extraindo-a completamente e levantando-a para cima,
como se fosse uma gaveta comum (Fig. 1);
2. Tire o rodapé inferior puxando-o para cima e depois para fora (Fig. 2);
3. Com uma chave de caixa de 10 rode as porcas sextavadas, mostradas na figura ao
lado, até obter o nivelamento horizontal em relação ao pavimento (Fig. 3);
4. Reinstale o rodapé introduzindo primeiro os dois parafusos em baixo e encastrando-o
então com os dois parafusos em cima (Fig. 4).
… 29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg BL-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg BL-1 in the language / languages: Dutch as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info