687306
2
Zoom out
Zoom in
Previous page
1/2
Next page
• Remove the screw, and the backside
• Plug in the black jumper, and you will hear a beep
• To change the password: press code 1 2 3 4
and then the new password: Don’t start the new
one with a 4
• The LED will blink for 30 seconds
Press the new password in within the 30 seconds
• Mount on window, door or closet
• Press 4, You’ll hear a beep, and after 30 seconds
the alarm is activated
• 5 seconds after opening the contact the alarm
will go!
• Press within 5 seconds your password to deactivate
and avoid alarm
• Accu needs to be charged
Accu is charging as long as the LED blinks
Accu is charged when LED burns continuously
• Wykręć wkręt , a tyłek
Podłącz czarny skoczek , a usłyszysz sygnał dźwiękowy
• Aby zmienić hasło : kod naciśnij 1 2 3 4
A następnie nowe hasło : Nie uruchamiać nowe z 4
• Dioda LED będzie migać przez 30 sekund
Naciśnij nowego hasła w ciągu 30 sekund
• Zamontować na okno, drzwi lub szafy
• Naciśnij przycisk 4 , usłyszysz sygnał dźwiękowy ,
a po 30 sekundach alarm jest włączony
• 5 sekund po otwarciu kontaktu alarm przejdzie !
• Naciśnij w ciągu 5 sekund , aby wyłączyć hasło
i uniknąć alarm
• Accu musi być pobierana
Accu jest ładowany tak długo, jak dioda LED miga
Accu jest pobierana , gdy LED oparzenia stale
Retirez la vis, et le cache arrière
Insérez le cavalier noir, et vous entendrez un bip
Tapez 1 2 3 4 puis votre code personnel
Remarque : Ne pas commencer avec le chiffre 4
Le témoin LED clignote pendant 30 secondes
Vous avez donc 30 secondes pour taper à nouveau
votre code personnel afin de le confirmer.
Installez la mini alarme sur une fenêtre,
une porte ou un placard
Pour activer l’alarme, appuyez sur le chiffre 4,
vous entendrez un bip, la mini alarme s’armera
au bout de 30 secondes (temps de sortie).
L’alarme se déclenchera 5 secondes après l’ouverture
du contact (temps d’entrée)
Vous avez ainsi 5 secondes pour taper votre code
afin de désactiver l’alarme
La batterie doit être pleinement chargée, chargez-la
à l’aide du câble fournis
La batterie est pleinement chargée lorsque le témoin
LED clignote rapidement
• Entfernen Sie die Schraube und die Rückseite
• Stecken Sie den schwarzen Pullover, und Sie hören
einen Signalton
• Pressecode 1 2 3 4 : Um das Passwort zu ändern
Und dann das neue Passwort : Möchten Sie die
neue mit einem 4 starten nicht
• Die LED für 30 Sekunden blinken
• Drücken Sie das neue Kennwort in innerhalb der
30 Sekunden
• Berg am Fenster, Tür oder Schrank
• Drücken Sie 4 , werden Sie einen Piepton hören ,
und nach 30 Sekunden der Alarm aktiviert
• 5 Sekunden nach Öffnen des Kontaktes wird der
Alarm los!
• Drücken Sie innerhalb von 5 Sekunden , um Ihr
Passwort zu deaktivieren und Alarm zu vermeiden
• Accu geladen werden muss
Accu wird so lange Lade wie die LED blinkt
Accu wird geladen, wenn LED brennt kontinuierlich
• Verwijder schroef en achterzijde
• Steek de zwarte jumper op de connector,
u hoort een biep
• Password veranderen, toets 1234 in.
Niet met 4 beginnen
• De led knippert ca 30 sec.
Toets uw nieuwe pasword in binnen 30 seconden
• Monteer op raam deur of kast
• Druk 4 in; biep en alarm schakelt in na 30 seconden
• Na 5 seconden na openen gaat alarm af
• Schakel binnen 5 seconden uit door intoetsen
van het password
• Accu moet worden opgeladen
• Accu laad op zolang led knippert
• Accu opgeladen als led continu brand
• Quite el tornillo y la parte trasera
• Tapón en el puente negro , y se oye un pitido
• Para cambiar la contraseña : código de prensa 1 2 3 4
Y a continuación, la nueva contraseña : No se inicia
el nuevo con un 4
• El LED parpadeará durante 30 segundos
• Pulse la nueva contraseña en dentro de los 30
segundos
• Montar en ventana, puerta o armario
• Pulse 4 , Usted escuchará un pitido, y después de 30
segundos se activa la alarma
• 5 segundos después de abrir el contacto de la
alarma se !
• Presione dentro de los 5 segundos la contraseña para
desactivar y evitar la alarma
• Accu necesita ser cargada
Accu está cargando , siempre y cuando el
LED parpadea
Accu se carga cuando el LED se quema de forma continua
EN
PL
FR
DE
NL
ES
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smartwares SC33FR - 10.047.95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smartwares SC33FR - 10.047.95 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info