544782

Skytronic 710.285 Manual

2
Zoom out
Zoom in
Previous page
1/6
Next page
UK
Thank you for buying this SkyTronic net wire tester. Read this licence thoroughly before using the
apparatus.
Attention
- Be sure to use a 9V battery, other voltages might damage the circuit.
- When you don’t use the tester for a long period of time; remove the battery.
- Don’t connect this apparatus with a wire which is connected to a mains socket. This might result in
heavy damage and even death.
- Never test wiring which is directly connected to an active network.
- Don’t renew or remove any internal parts.
- Battery is excluded.
What’s inside the packaging
- Main unit (signal and terminator)
- Secondary unit (terminator)
- 2x BNC to RJ45 cable
- This manual
How to use
Plug one end of the cable in the main unit’s sending socket (the one indicated with the red arrow) and
the other end in the left socket or in the secondary unit’s socket. Now turn the power on by pushing
and releasing the ‘POWER’ button. The lights will now blink red or green. Check the meaning of the
indications below.
All green: ...........................OK, straightwired
All red: ..................................OK, crosswired
Mix or no light: ................................miswired
One sequence will take up to two seconds. Now you know how your cable is wired. Push and release
the ‘POWER’ button again and the apparatus will switch off.
This tester can be used for RJ45 cables and for BNC cables. BNC cables can be connected with the
tester by connecting them first to the BNC/RJ45 transformer cables. After that, plug it the two RJ45
ends and you can test the cable the same way you would do with a regular RJ45 cable.
Specifications
Power supply: ..........................................................................................9Vdc / 8mA
Scan time: .....................................................................................2 seconds approx.
Battery type: ........................................................ 9V cascade battery (6F – type 22)
Weight: ................................................................................................................250g
Size (hxwxd):
Main unit: .......................................................................27mm x 62mm x 103mm
Secondary unit: .............................................................27mm x 30mm x 103mm
• Specifications and design are subject to changes without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytronic 710.285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytronic 710.285 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info