574415
6
Zoom out
Zoom in
Previous page
1/8
Next page
DIODE AND AUDIBLE CONTINUITY TEST
Range Description Test Condition
The approx. forward
voltage drop of the diode
will be displayed on the
LCD.
The forward DC current
is approx. 1mA, the
reversed DC voltage is
approx. 2.8V.
If the resistance of the
circuit under test is less
than 40, the built-in
buzzer will sound.
Open circuit voltage is
approx. 2.8V.
TRANSISTOR TEST
Range hFE Test Current Test Voltage
PNP & NPN 0~1000 1b=10µA Vce=2.8V
OPERATING INSTRUCTION
DC VOLTAGE MEASUREMENT
1. Connect the red test lead to the “V” jack and the black test
lead to the “COM” jack
2. Set the range switch to the desired
” range. If the voltage
to be measured is not known beforehand, set the range
switch to the highest range and then turn down range by
range until satisfactory resolution is obtained.
3. Connect the test lead to the source or load to be measured.
4. Read the voltage value displayed on the LCD.
AC VOLTAGE MEASUREMENT
1) Connect the red test lead to the “V” jack, and the black test
lead to the “COM” jack.
2) Set the range switch to the desired “
” range. If the
voltage to be measured is not known beforehand, set
the range switch to the highest range and then turn down
range by range until satisfactory resolution is obtained.
3) Connect the test lead to the source or load to be measured.
4) Read the voltage value displayed on the LCD.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytronic 600.005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytronic 600.005 in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info