615730
209
Zoom out
Zoom in
Previous page
1/212
Next page
1. F: Der DVR erkennt die Festplatte nicht
A: Bitte überprüfen Sie die HDD Kabel und Netzkabel, oder ob der Main board’s HDD Port ist in gutem
Zustand . Bitte überprüfen Sie auch die Festplaate ob die unterstützt wird, siehe die Daten.
2. F: Kein Videosignal oder abnormal Bild auf dem Monitor, während der DVR und Kamera gut funktionieren
und mit Strom versorgt werden.
A: Überprüfen Sie die BNC Verbindung, verwenden Sie einen alten Kabel? , oder die Auflösung stimmt nicht
(NTSC/PAL).
3. F: Wo sollte der DVR montiert werden?
A: Der DVR produziert Wärme, bitte den DVR auf einen sicheren PLatz montieren und sorgen Sie für eine
gute Belüftung.
4. F: Warum funktioniert die Fernbedienung nicht, während das Livebild zur Verfügung steht und die Taste
auf der Frontplatte normal wirkt.
A: Achten Sie darauf daß die Fernbedienung und der IR-Empfänger des Videorekorder während des
Betriebs aufeinander abgestimmt werden müssen. Wenn die Fernbedienung immer noch nicht funktioniert,
dann überprüfen Sie die Batterie(n), die Fernbedienung kann defekt sein.
5. F: Kann der DVR die Festplatte des PC unterstützen wenn die in DVR installiert ist?
A: Die Festplatte kann benutzt werden es sollte jedoch beachtet werden, dass die gesamten Dateien, sobald
der DVR läuft verloren gehen.
6. F: Kann der DVR aufnehmen und gleichzeitig abspielen?
A: Ja, das geht.
7. F: Kann ich einige aufgezeichnete Dateien auf der DVR-Festplatte löschen?
A: Aus Sicherheitsgründen empfehlen wir Ihnen, keine beliebigen Bilddateien zu entfernen.
8. F: Warum kann ich nicht einloggen auf der DVR CMS?
A: Überprüfen Sie die Netzwerkverbindung ob die Einstellung korrekt ist oder nicht, oder den RJ-45-
Anschluss eine gute Verbindung hat oder der Benutzername oder das Kennwort für die Netzwerkanmeldung
richtig ist oder nicht.
9. F: Warum gibt es ein temporäres Stottern während einer Live-Bild Fernüberwachung?
A: Stöttern dauert normal vorübergehend 5 Sekunden.
10.F: Kann keine Aufnahme-Information finden wenn ich abspielen möchte.
A: Überprüfen Sie die Festplatte wenn die richtig mit dem DVR verbunden ist und dass die Systemzeit
korrekt ist oder nicht. Wenn alles richtig angeschlossen ist und Sie das System erneut starten, überprüfen Sie
ob die Festplatte beschädigt ist oder nicht.
11.F: Nach dem Einstellen kann der PTZ nicht betätigt werden.
A: Bitte überprüfen Sie :
,1 PTZ Kamera defekt
,2 PTZ Decoder Einstellung, Verbindung, Installation stimmen nicht.
,3 Die DVR PTZ Einstellung stimmt nicht.
,4 Der PTZ Decoder entspricht nicht das DVR Protokoll.
,5 Der PTZ Decoder entspricht nicht die DVR Adresse.
,6 Bei einem Anschluss an einen Multi Decoder müssen Sie einen Widerstand von 120 Ohm am Ende der
PTZ-Decoderlinie einfügen um Reflexionen zu beseitigen. Die PTZ-Betätigung wird sonst instabil.
Fragen und Antworten
209


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytronic 351.158 DVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytronic 351.158 DVR in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 10,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info