480091
9
Zoom out
Zoom in
Previous page
1/140
Next page
9
Do not use charger when cord or plug is damaged; cord
or plug should be replaced immediately at one of the
ocially registered SKIL Service Stations
Do not disassemble charger or tool
EXPLANATION OF SYMBOLS ON TOOL/CHARGER
3 Read the instruction manual before use
4 Do not expose tool/charger to rain
5 ! After switching o the tool the blade continues
to move for a few seconds
6 
 (keep bystanders a safe distance away from work
area)
7 Only use the charger indoors
8 Double insulation (no earth wire required)
9 Automatic shut-o when charger gets too hot (thermic
fuse blows and charger becomes useless)
0 Incorrect polarity of the charger connection could cause a
hazard (only charge the battery with the charger supplied)
! Do not dispose of the charger together with household
waste material
@ Do not dispose of the battery together with household
waste material
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
If for any reason the old plug is cut o the cord of the
charger, it must be disposed of safely and not left
unattended
Do not connect the blue (= neutral) or brown (= live) wire
in the cord of the charger to the earth terminal of the plug

Charging battery #
- battery of new tools is not fully charged
 


IMPORTANT:
- while charging, the charger and the battery may
become warm to touch; this is normal and does not
indicate a problem
 



- connect charger B with both wall socket and contact C
- charging light D turns on indicating that the tool is
being charged
- when the battery is fully charged, charging light D
turns o (after 4-6 hours)
- the lithium-ion battery can be charged at any time
(interrupting the charging procedure does not damage
the battery)
- the lithium-ion battery does not have to be empty
before charging (no “memory-eect” as with
nickel-cadmium batteries)
- if you anticipate long periods of non-use for the tool, it
is best to unplug the charger from its power source
Battery protection
Switches o the tool automatically when
1) the battery temperature is not within the allowable
operating temperature range of -10 to +60°C
2) the lithium-ion battery is nearly empty (to protect
against deep discharge)
 


On/o safety switch $
Prevents the tool from being switched on accidentally
- switch on tool by rst pressing safety switch E 2 and
then pulling trigger switch F 2
- switch o tool by releasing trigger switch F
- move tool away from cutting area before switching o
 

Changing blades %
 
- turn tool upside down
- push release button G
- slide protective cover H in same direction as arrow
printed on cover and lift it from the housing
 


- lift blade J or K out and mount required blade as
illustrated
- position protective cover H back and slide it towards
the blade until it snaplocks
Holding and guiding the tool
 
^
- maintain a stable working position
- keep your other hand away from the cutting blades
Trimming hedges &
- trim the sides of the hedge rst (from the bottom
upwards), then cut the top
- trim the side of a hedge in such a way that it will be
slightly narrower at the top
- use a hand saw or pruning shears to cut thicker
branches
- shrub shear blade K as well as grass shear blade J
can be used for trimming hedges
Trimming grass and shrubs *
- when cutting long grass, work in stages from the top
and take small cuts
- for optimal cutting results, only cut dry grass
- keep the tool away from solid objects in order to
protect the cutting blades against excessive wear
- grass shear blade J can also be used for trimming
shrubs

For trimming a hedge at a uniform height level
- fasten a piece of string along the length of the hedge
at the desired height
- trim the hedge just above this string
Recommended cutting/trimming times (Western Europe)
- trim hedges with deciduous leaves in June and
October
- trim evergreen hedges in April and August
- trim conifers and other fast-growing shrubs every 6
weeks from May until October
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0755 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0755 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info