591170
5
Zoom out
Zoom in
Previous page
1/124
Next page
5

Hedge cutter 0740
INTRODUCTION
This tool has been designed for trimming hedges and
bushes and is intended for domestic use only
This tool is not intended for professional use
• Readthisinstructionmanualcarefullybeforeuse
andsaveitforfuturereference3
• Payspecialattentiontothesafetyinstructionsand
warnings;failuretofollowthesemayresultin
seriousinjury
Check whether the packaging contains all parts as
illustrated in drawing 2
When parts are missing or damaged, please contact your
dealer
TECHNICAL DATA 1
TOOL ELEMENTS 2
A Cord restraint
B Front handle switch
C Rear handle switch
D Cutting blades
E Protective guard
F Blade tip protector
G Ventilation slots
H Storage rail (screwsnotsupplied)
J Blade cover
SAFETY
GENERAL SAFETY INSTRUCTIONS
WARNING!Readallsafetywarningsandall
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury. Save
allwarningsandinstructionsforfuturereference. The
term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) WORK AREA SAFETY
a) Keepworkareacleanandwelllit. Cluttered or dark
areas invite accidents.
b) Donotoperatepowertoolsinexplosive
atmospheres,suchasinthepresenceofflammable
liquids,gasesordust. Power tools create sparks which
may ignite the dust or fumes.
c) Keepchildrenandbystandersawaywhileoperating
apowertool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Powertoolplugsmustmatchtheoutlet.Never
modifythepluginanyway.Donotuseanyadapter
plugswithearthed(grounded)powertools.
Unmodied plugs and matching outlets will reduce risk of
electric shock.
b) Avoidbodycontactwithearthedorgrounded
surfacessuchaspipes,radiators,rangesand
refrigerators.There is an increased risk of electric
shock if your body is earthed or grounded.
c) Donotexposepowertoolstorainorwetconditions.
Water entering a power tool will increase the risk of
electric shock.
d) Donotabusethecord.Neverusethecordfor
carrying,pullingorunpluggingthepowertool.Keep
cordawayfromheat,oil,sharpedgesormoving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) Whenoperatingapowertooloutdoors,usean
extensioncordsuitableforoutdooruse. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
f) Ifoperatingapowertoolinadamplocationis
unavoidable,useanearthleakagecircuitbreaker.
Use of an earth leakage circuit breaker reduces the risk
of electric shock.
3)PERSONALSAFETY
a) Stayalert,watchwhatyouaredoinganduse
commonsensewhenoperatingapowertool.Donot
useapowertoolwhileyouaretiredorunderthe
influenceofdrugs,alcoholormedication. A moment
of inattention while operating power tools may result in
serious personal injury.
b) Usepersonalprotectiveequipment.Alwayswear
eyeprotection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c) Preventunintentionalstarting.Ensuretheswitchis
intheoff-positionbeforeconnectingtopower
sourceand/orbatterypack,pickinguporcarrying
thetool. Carrying power tools with your nger on the
switch or energising power tools that have the switch on
invites accidents.
d) Removeanyadjustingkeyorwrenchbeforeturning
thepowertoolon. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
e) Donotoverreach.Keepproperfootingandbalance
atalltimes. This enables better control of the power tool
in unexpected situations.
f) Dressproperly.Donotwearlooseclothingor
jewelry.Keepyourhair,clothingandglovesaway
frommovingparts. Loose clothes, jewelry or long hair
can be caught in moving parts.
g) Ifdevicesareprovidedfortheconnectionofdust
extractionandcollectionfacilities,ensuretheseare
connectedandproperlyused. Use of dust collection
can reduce dust-related hazards.
4)POWERTOOLUSEANDCARE
a) Donotforcethepowertool.Usethecorrectpower
toolforyourapplication. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b) Donotusethepowertooliftheswitchdoesnotturn
itonandoff. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnecttheplugfromthepowersourceand/or
thebatterypackfromthepowertoolbeforemaking
anyadjustments,changingaccessories,orstoring
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0740 in the language / languages: All languages as an attachment in your email.

The manual is 7,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info