236620
2
Zoom out
Zoom in
Previous page
1/4
Next page
2
1. Netwerkconfiguratie
1.1 Netwerkprotocollen
Windows installeert automatisch drie netwerkprotocollen tijdens de installatie van de
hardware. Hoewel per netwerkapplicatie slechts één protocol gebruikt wordt, doet u er
goed aan de drie protocollen te bewaren, omdat verschillende applicaties verschillende
protocollen kunnen gebruiken. Voor Internet sharing (gezamenlijke toegang tot het
internet), bijvoorbeeld, wordt TCP/IP gebruikt, terwijl voor sommige netwerkspellen
IPX/SPX nodig is.
NetBEUI: staat voor NetBIOS Extended User Interface, het netwerkprotocol van
Windows zelf. NetBEUI bevat geen netwerkadres en is daarom geen routeerbaar
protocol. Dit betekent dat data niet van het ene naar het andere netwerk gerouteerd kan
worden.
IPX/SPX: staat voor Internet Packet eXchange/Sequenced Packet eXchange. Het is een
op Novell NetWare gebaseerd protocol dat gebruikt wordt voor het routeren van
berichten tussen netwerkknooppunten. IPX/SPX is een routeerbaar protocol en omdat
IPX pakketten netwerkadressen bevatten, kan data-uitwisseling plaatsvinden tussen
verschillende netwerken. SPX zorgt ervoor dat een bericht (een data IPX pakket)
ongeschonden op de bestemming aankomt.
TCP/IP: staat voor Transmission Control Protocol/Internet Protocol. TCP/IP is ontwikkeld
door het Ministerie van Defensie in de V.S. om verbindingen en netwerken mogelijk te
maken met ongelijksoortige systemen. TCP verzorgt de datatransportfuncties en IP
voorziet in het routeermechanisme. TCP/IP is een routeerbaar protocol. Elke cliënt en
server in een TCP/IP netwerk moet een IP-adres hebben, dat permanent kan worden
toegekend of dynamisch (DHCP – Dynamic Host Configuration Protocol), hetgeen
betekent dat het protocol uit een pool van adressen put, telkens wanneer de machine
ingeschakeld wordt.
1.2 Configuratie voor TCP/IP
Voor het opzetten van de netwerkverbinding tussen beide PC’s maken we gebruik van
het TCP/IP protocol, hetgeen we moeten configureren.
Let op: Indien u een DHCP server gebruikt (bijvoorbeeld, Sitecom routers en de meeste
draadloze AccessPoints hebben een ingebouwde DHCP server) kunt u deze stap
overslaan. Volg de stappen in de handleiding van de router of AccessPoint, waarin wordt
beschreven hoe het TCP/IP ingesteld moet worden om 'automatisch een IP-adres te
krijgen'. Dit zal de standaardinstelling (default setting) van Windows zijn.
Windows 98/ME
Klik met de rechter muisknop het pictogram Netwerkomgeving of Mijn
Netwerklocaties op het bureaublad en kies Eigenschappen. Wanneer u meerdere
netwerkkaarten heeft, moet u erop letten dat u de juiste kaart selecteert. Elke
netwerkkaart heeft zijn eigen specifieke gegevens.
Selecteer het TCP/IP protocol en kies Eigenschappen. Op het tabblad algemeen kiest
u voor Geef een IP-adres op, gebruik 192.168.1.1 als IP-adres en verhoog het
laatste cijfer van het IP-adres voor elke machine (het IP-adres van de tweede
machine wordt dan 192.168.1.2, van de derde 192.168.1.3 enz.). Het subnetmasker
moet voor alle machines hetzelfde zijn (255.255.255.0). De Gateway of DNS
nummers hoeft u niet te wijzigen.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom 200mbps homeplug kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom 200mbps homeplug kit in the language / languages: Dutch as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info