456093
2
Zoom out
Zoom in
Previous page
1/3
Next page
Starting Procedure and Corrections
For the corrections release the screwed crown by winding counterclockwise.
The crown has 3 positions:
Position 1: winding
Position 2:
Clockwise
: adjustment of the date
Counterclockwise
: adjustment of the weekday
Please always adjust the weekday first and then the date or reset the crown to position 1 after adjusting the
weekday.
! CAUTION !: Please do not use the day and date correction in position 2 between 9 p.m. and 3 a.m. A correction
during this time may cause damage to the movement.
Position 3: hand setting and second hand stop
For a precise setting we recommend to pass beyond the desired minute position and set the hand backwards.
While setting the time, please note that the day does not change at midday but at midnight. Turn the hands
clockwise until the date changes and then set the correct time.
The second hand stop enables you set the time precisely. The movement starts again when position 3 is left.
After the corrections the crown must be screwed down.
An optimal result of running will be achieved if the watch is wound at the same time every day.
Stop Function
Your watch comes with a chronograph function (stop function). This enables you to measure and record periods of
up to 12 hours.
The sweep seconds, the 30- minute and the 12-hour recorder are used for short-term measurement with the
chronograph.
The chronograph is operated with both button (A) and (B). Release the screwed buttons (A) and (B) by winding
counterclockwise.
Time measurement starts when button (A) is pressed once. Pressing button (A) again stops the measurement.
Pressing button (A) once more will continue the short-term measurement. This process can be repeated as many
times as necessary, allowing you to record the cumulative time taken for a series of events.
Once timing has been completed, press button (B) to reset the hands of the chronograph to zero.
Countdown Bezel
The countdown bezel is an exterior rotating scale with converse minute division. It is hand operated and can be
moved into both directions.
This enables you to count down periods of up to one hour.
Adjust the bezel in such a way that the minute hand will point directly to the given time. As soon as the minute hand
points to the triangle the time has run down.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sinn 103 A Sa Hd at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sinn 103 A Sa Hd in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sinn 103 A Sa Hd

Sinn 103 A Sa Hd User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info