617395
73
Zoom out
Zoom in
Previous page
1/75
Next page
73
The power is turned on without the foot control
being connected.
The foot control is disconnected while sewing.
Connect the foot control and
restart the machine.
The power is turned on while depressing the foot
control.
Release the foot control.
The power is turned on with the needle in the
down position.
Press the needle up/down button
to raise the needle.
The machine is being asked to sew without
lowering the presser foot.
The thread cutter button is pressed with the
presser foot raised.
Note:The machine will stop if the presser foot
is raised while sewing.
Lower the presser foot and
restart to sew.
Lower the presser foot and press
the thread cutter button again.
The machine will stop if the buttonhole is sewn
without lowering the buttonhole lever.
Lower the buttonhole lever and
restart the machine.
The foot control is released while sewing a
locking stitch.
Depress the foot control
again to let the machine stop
automatically.
The auto thread cutter button is pressed when the
machine is still initializing after turning the
power on.
Pressing the thread cutter button 4 times in a row
The twin needle button is pressed when a pattern
unsuitable for twin needle sewing has been
selected.
Sew with a single needle.
Problems and Warning Signals
Buzzer sounds and LCD screen pictures tell you that the machine is sensing a problem. These symbols are explained
below and what action needs to be taken.
Warning Sign
Cause
Action
Press the thread cutter button
after the machine stops. The
thread being used is not
compatible with the auto thread
cutter. Use the thread cutter on
the face plate. Check that there
is not thread lodged in the auto
thread cutting mechanism.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer S18 Studio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer S18 Studio in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info