617487
23
Zoom out
Zoom in
Previous page
1/23
Next page
23
See page 10.
See page 14.
See pages 13.
See pages 13.
See page 12.
See pages 11, 13.
See page 9.
See page 19.
Replace the bobbin.
See pages 13.
See pages 13.
See pages 13.
See pages 13.
See pages 11, 13.
See page 13.
See page 10.
Change the needle.
See page 14.
See page 10.
See pages 11, 13.
Make the stitch shorter.
See page 19.
Make the stitch longer.
See page 14.
See pages 11, 13.
See page 4.
See page 19.
See page 19.
See page 19.
See page 19.
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not set under the
presser foot when starting to sew.
6. The thread is either too heavy or too fine for the needle.
7. The thread is feeding unevenly off the spool.
1. The bobbin thread is not threaded properly in the bobbin case.
2. Lint has collected in the hook area.
3. The bobbin is damaged and doesn't turn smoothly.
1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The needle is too fine for the fabric being used.
1. The needle is incorrectly inserted, bent or blunt.
2. The needle and/or fabrics are not suitable for the work being sewn.
3. A ballpoint needle is not used when sewing stretch, very fine fabrics
or synthetics.
4. The needle thread is not threaded properly.
5. A poor quality and improper needle type is being used.
Use only HL x 5 needles.
1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
1. The feed dog is packed with lint.
2. The stitches are too fine.
1. The needle thread tension is too loose.
2. The needle is either too heavy or too fine for the thread.
3. Knee lifter is being lightly pressed by knee.
1. The machine is not plugged in.
2. Thread has been caught in the hook and bobbin case area.
1. Thread has been caught in the hook and bobbin case area.
2. Lint has built up in the hook area or bobbin case.
3. The machine needs oiling.
Troubleshooting
Condition
The needle thread
breaks
The bobbin thread
breaks
The needle breaks
Skipped stitches
Seam puckering
Fabric feeding problems
Thread loops on
underside of fabric
Power is off to machine
Unusual noises made by
machine
Reference
Cause
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer S16 STUDIO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer S16 STUDIO in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info