617033
50
Zoom out
Zoom in
Previous page
1/51
Next page
49
OVERCASTING FOOT
This foot is used to guide fabric when
overcasting. Place your fabric under
the foot with its edge against the edge
guide and start to sew.
PATA PARA
OVERLOCADO
Este pata se utiliza para guiar el
material durante el overlocado. Situe
el género bajo la pata con su borde
contra el canto de la guia y comience
a coser.
SATIN STITCH FOOT
Satin stitch foot is grooved to permit
dense stitching to pass under it easily.
Closely spaced zig-zag stitches are
called satin stitches. This is an
attractive stitch used for appliqueing,
bar tacking.
Slightly loosen top thread tension for
satin stitching.
Use a backing of tissue paper or
interfacing for the sheer materials to
avoid puckering.
PIE PRENSATELAS
PARA COSER EN SATEN
El pie prensatelas para tejido satén
está rebajado para permitir que las
puntadas densas pasen fácilmente
bajo la pata.
La puntada de zig-zag corta, se llama
puntada satén. Esta es una puntada
atractiva usada para apliques,
atacados y presillas.
Aflojar suavemente la tensión del hilo
superior para esta puntada.
Usar papel de seda ó entretela no
tejida, para evitar las arrugas en
materiales finos.
ENGLISH ESPAÑOL FRANÇAIS
PlED POUR SURFILAGE
Ce pied est conçu pour guider le tissu
pendant le surfilage. Placez votre tissu
sous le pied avec le bord aligné contre
le côté du pied et commencez à
coudre en le suivant.
PIED POUR POINT
BOURDON
Le pied pour point bourdon est doté
de rainures afin que les points serrés
puissent passer facilement par
dessous.
Les points zigzag serrés sont appelés
points bourdon. Ils conviennent bien
au faufilage et aux coutures par
application.
Pour le point bourdon, diminuer
légèrement la tension du fil supérieur.
Utiliser un soutien en papier ou de
l’entoilage pour les tissus très fins afin
d’éviter la formation de fronces.
ROLLED HEMMER
Fit the rolled hemmer and sew guiding
the fabric into the scroll of the foot.
Rolled hemming is performed with a
zig- zag stitch, narrow hemming with
a straight stitch.
DOBRADILLO RODILLO
Colocar el prensatelas de dobladillo
rodillo y coser guiando el tejido en el
rollo de pie.
Dobladillo rodillo es cumplido con
puntada zig-zag, dobladillo estrecho
con puntada recta.
PIED POUR OURLET
ROULET
Installer le pied pour ourlet rouletté et
coudre en guidant le tissu dans
l’ouverture du pied presseur.
L’ourlet rouletté est effectué en point
zigzag, et un ourlet étroit avec point
droit.
5. SPECIAL
ACCESSORIES
5. ACCESORIOS
ESPECIALES
5. ACCESSOIRES
SPÉCIALES
Edge guide
Canto de guia
Guide latéral
du tissu
Scroll
Rollo
Ouverture
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer 2662 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer 2662 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info