39209
67
Zoom out
Zoom in
Previous page
1/122
Next page
Installation
20220760L 65
6.5 Transducers
Follow carefully the instructions that come with the speed/temp.
and depth transducers.
Mounting Guidelines
Depth Transducers
The main source of the vessel generated noise is the propeller.
The deeper the transducer projects the lower the risk of
aerated water.
On displacement hulls place the transducer 1/3 aft along
waterline.
Avoid locations near the keel or bow due to aeration.
Mount the transducer on the side of the hull where the
propeller is moving downward.
On sailboats mount forward of the fin keel, with minimum
dead rise.
On planing vessels mount aft near the keel to insure water
contact at high speed.
On I/O’s mount close to the engine.
On inboards mount well ahead of the propeller.
On higher speed vessels (+27 knots) mount in known good
locations.
Do not mount near water discharge or behind struts or fittings,
which will create turbulence.
For dead rise greater than 10 degrees a fairing is
recommended.
Speed Transducer
On sailboats the sensor should be mounted close to the
centerline and 12 to 24” ahead of the keel.
On displacement vessels the paddlewheel should be mounted
well aft so the sensor is always in contact with the water.
Do not position the paddlewheel directly ahead of a depth
transducer.
Do not locate the speed sensor behind struts or thru-hull
fittings.
67


Need help? Post your question in this forum.

Forumrules
1

Forum

simrad-is15

Reset search

  • Simrad is15 multi???
    How do u convert display depth meters to feet?
    Help Submitted on 17-6-2023 at 13:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Simrad IS15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Simrad IS15 in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Simrad IS15

Simrad IS15 User Manual - German - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info