(1) Press the reset button for 6 seconds till the indicator ash
rapidly.Then device turns to smart wi mode.
(2) Press the reset button again for 6 seconds till the indicator ash
slowly. The device turns to AP mode.
NOTE:
1. Powered by USB,PIR sensor won’t be in sleep mode
2. Device detects every 1 min,will alarm continuously when
movement is detected
3. Support 2.4GHz Wi-Fi only ;
4. When the power supply is switched, there will be a delay in the
APP display
5. Default temperature alarm range: 64℉ - 122℉;Default humidity
alarm range: 40% - 80% RH
MOTION SENSOR
INSTRUCTION
You can experience the various advanced features of
the product with the app, just try and do it yourself.
Main fuction
1. Tamper-proof
When PIR housing is taken, app will push notication.
2. Temperature and humidity detection
Powered by battery, short press button for 2 times . the
indicator will be ashing .PIR is in paring mode, users
can edit the alarm scale of temperature and humidity
and temperature’s remark.
3. Alarm record
Device record
APP recording:Check all the added devices alarm
message in history .
Smart life
Battery
LED indicator
Reset button
Sensor probe
USB port
Base
Screw
Screw stopper
Battery: CR123A 3V*2
USB power: 5V/1A
Standby current: 60uA
Detect range: 10M
Detect angle: 120°
Detect temperature: -10℃～ 0℃
Detect humidity: 0%～ 100%
Wireless type: 2.4GHz
Wireless standard: IEEE 802.11b/g/n
Wireless range: 45M
Operating temperature: 0℃～ 40℃
Operating humidity: 20% ～ 85%
Size: 68mm x 56mm x 56mm
Device Status
Smart Wi-Fi
AP mode
Reset
Pairing mode
LED State
Indicator ashes 2times/second
Indicator ashes 1time /2 seonds
Pressing button for 5-7s
Indicator light continues to ash
for 1 minute
Thanks for
Choosing our WiFi Smart Home Sensors
What’s the App User Interface Like ?SpecicationsProduct CongurationExperience Advanced FeaturesLED StateGet Started with Tuya Smart App
1. Download APP
Download the "Smart life" app
from APP Store or Google Play
to your mobile.
2. Register and Login
Launch the "Smart life" app.
To register,enter your mobile phone number or email
address,create a password ,then login to the app.
Login if you have an account already.
3. Add Device
Power on the smart sensor which default's mode is
Smart WiFi mode.
Select the “+” symbol on the top right-hand corner.
Select your product type and follow the instructions of
the app.
If the connecting fails,try using AP Mode
On the “Add device” page select “AP Mode” on the top
right-hand corner and follow the instructions of the app.
Finally,have fun!
With temperature and humidity sensor
Other fuction
Linkage alarm setting
To connect two Sensors via scene setting.
Device sharing
Allow others to control the device
Push notication
Open/close push notication
Remove device
Restore default settings; Delete and add the device
again to clear the record by APP.
Make Your Home Smarter
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Silvergear 1836 Motion Sensor at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Silvergear 1836 Motion Sensor in the language / languages: English as an attachment in your email.
The manual is 1.51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
