Manual Silvercrest SSMK 40 B2 IAN 75929 (page 34 of 37) (English, German, Dutch, French)

739818

Zoom out

Zoom in

1/37

34 GB

After use, switch oﬀ the shiatsu cushion by

pressing the On /Oﬀ button

Back massage:

Select with button A+B

, A

or B

the

area you would like to have massaged:

A+B: your whole back

A: upper back

B: lower back.

The LED lamp signalises the massage area that

has been set.

Note: When you select the massage area, the

automatic switch-of will be activated and set at

15 minutes.

Press the timer button

, employing the appro-

priate frequency, to set the automatic switch-oﬀ

at 5, 10 or 15 minutes.

Note: by resetting the timer setting, the timer will

begin counting anew. At the beginning of the

massage, select the maximum duration of the

massage and do not change this during the

massage in order to prevent the shiatsu cushion

from overheating.

Note: Ensure that you are experiencing the

massage as pleasant and relaxing. If necessary,

vary the pressure and/ or your position. Stop the

massage at once if it is painful or unpleasant.

Heating function:

Press the heat button

, to activate the heating

function.

Press the heat button

once again to deacti-

vate the heating function.

Note: The heating function cannot be activated

unless a massage program has been previously

selected.

Seat vibration:

Press the seat vibration button

to activate

the seat vibration. The vibration starts at a low

intensity and the relevant LED for seat vibration

will light up.

Press the seat vibration button

, with the

appropriate frequency, to switch to low,

medium or high intensity or to deactivate the

seat vibration.

Note: The seat vibration can be activated

together with the back massage. However, the

vibration intensity will be slightly reduced in

this case.

Demonstration:

Press the Demo button

to have the functions

of the shiatsu cushion demonstrated to you.

Troubleshooting

Problem

Cause

Rectiﬁcation

Massage heads rotate slower and slower.

Too much pressure on massage heads.

Relieve pressure on massage heads.

Massage heads do not move.

shiatsu cushion is not connected to the mains

supply.

Insert the plug and switch on the cushion.

shiatsu cushion is not switched on.

Switch on the shiatsu cushion by pressing the

On /Oﬀ button

. Select the massage area.

The transportation lock has not been removed.

The massage mechanism is damaged.

Contact your specialist dealer or the service ad-

dress.

Cleaning and Care

DANGER TO

LIFE BY ELECTRIC SHOCK!

Always disconnect plug from the

mains socket before cleaning the shiatsu seat

cushion. Otherwise there is a risk of electric

shock.

DANGER OF ELECTRIC SHOCK!

Do not pull the cover

over the

cushion until it is completely dry.

Otherwise there is a risk of electric shock.

CAUTION! DANGER OF MATE-

RIAL DAMAGE! Do not use chem-

ical cleaners or scouring agents for

Bringing into service / operation / Troubleshooting / Cleaning and Care

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSMK 40 B2 IAN 75929 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SSMK 40 B2 IAN 75929 Manual

Product: