Manual Silvercrest SPU 900 A2 - IAN 90514 (page 68 of 72) (English, German, Dutch, French, Italian)

651496

Zoom out

Zoom in

1/72

- 65 -

Now switch the radio oﬀ again. The radio

function is explained on the following

pages.

When the alarm signal sounds...

• ... and the alarm function "Radio" is se-

lected, the radio switches itself on with

increasing sound volume and the last

adjusted radio station for one hour.

• ... and the selected alarm function is “sig-

nal tone”, the signal tone sounds with an

increasing volume for 10 minutes.

To close the individual alarm function press

any button except the SNOOZE/DIMMER

button y.

The Slumber function

When you press the SNOOZE/DIMMER but-

ton y, the presently active alarm is cancelled

for the time that is programmed for this func-

tion (see Section "Programme time for the

slumber function“, 1 - 59 min., standard value

= 9 min.). Meanwhile the SNZ indicator

glows in the display g. To permanently stop

an interrupted alarm, brieﬂy press the AL.SET

button a.

The Reminder function

The appliance will remind you of the dates

that you have programmed in with the re-

minder function. In these cases and on these

days, from 08:00 - 23:00 and on every

full hour, the reminder alarm will sound for

10 minutes. Additionally, the SDA indicator

blinks in the display g. Press any button to

end the reminder alarm.

Adjusting changing display indicators

When the appliance is in Standby, press the

button DOWN i. In the display appears

D–" (for Time and Date). Press the button

DOWN i once again, "

–W" appears in the

display (for Time and World Time). Press the

button DOWN i once again, "

DW" appears

in the display (for Time, Date and World

Time in rotation). Press the button DOWN

i once again, "

––" appears in the display

(only Time).

Radio operation

The technical data of the appliance makes

possible an adjustable frequency range wider

than the permitted frequency ranges of 87,5

- 108 MHz. In some countries, diﬀerent na-

tional regulations may apply to the assigned

radio frequency ranges. Please note that infor-

mation received outside of the assigned radio

frequency ranges may not be used, passed on

to third parties or otherwise misused. For VHF

radio reception, completely unwind the wire

aeriel 2) and, with the radio switched on, de-

termine the most favourable positioning for it.

Switching the radio on and oﬀ

1. Press the button

l. In the display g

the current frequency and the switch-on

symbol

is indicated. Next to it, the

clock symbol blinks and thus indicates

that the device is waiting for the reception

of the current time from an RDS station.

2. Press the button

lonce again to

switch the radio function oﬀ and return the

appliance to the standby mode.

Manual station selection

1. Press the button UP o to search for radio

stations with a frequency higher than the

one indicated in the display.

2. Press the button DOWN i to search for

radio stations with a frequency lower than

the one indicated in the display.

3. If the found radio station transmits RDS-

Data, the indicator in the dis-

play g glows. The display g indicates

the name of the radio station and the time

is updated (insofar as this adjustment is

activated, see the section "Programme the

Update function").

Automatic station search

You can also let the appliance search for

radio stations. The radio alarm then searches

the selected frequency range until it has

found a radio station.

BDA_SPU 900 A2 - IAN-90514_1_en.indd 65 22.07.2013 13:42:56

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SPU 900 A2 - IAN 90514 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SPU 900 A2 - IAN 90514 Manual

Product: