Manual Silvercrest SNMD 33 A1 - IAN 114195 (page 91 of 94) (English, German, Dutch, French)

614543

Zoom out

Zoom in

1/94

Problem Cause Correction

Upper thread

breaks

Lower thread

breaks

Skipped stitches

Needle breaks

Loose stitches

Seams gather

or pucker

Uneven stitches,

uneven feed

The machine is

noisy

Thread wraps

around thread

spool pin

The machine

jams

1.The machine is not threaded correctly.

2.The thread tension is too tight.

3.The thread is too thick for the needle.

4.The needle is not inserted correctly.

5.The thread has become wound

around the bobbin winder spindle (14).

6.The needle is damaged.

1.The bobbin case is not inserted

correctly.

2.The bobbin case is threaded wrongly.

1.The needle is not inserted correctly.

2.The needle is damaged.

3.The wrong size needle has been

used.

4.The wrong presser foot is installed.

1.The needle is damaged.

2.The needle is not correctly inserted.

3.Fabric too thick/ needle size wrong.

4.The wrong presser foot is attached.

1.The machine is not correctly threaded.

2.The bobbin case is not correctly

threaded.

3.Needle/ fabric/ thread combination is

wrong.

4.Thread tension wrong.

1.The needle is too thick for the fabric.

2.The stitch length is wrongly adjusted.

1.The thread is too weak.

2.The bobbin case is wrongly threaded

3.Fabric has been pulled when sewing.

1.The machine must be lubricated.

2.Fluff or oil have collected on the hook

or needle bar.

3.Poor quality oil has been used.

4.The needle is damaged.

The second thread spool pin was not

used.

Thread is caught in the hook.

1.Rethread the machine.

2. Reduce the thread tension (3). (lower number)

3.Use a larger needle.

4.Remove and reinsert the needle. (flat side

towards the back)

5.Remove the bobbin (g) and unwind the

thread.

6.Replace the needle.

1.Remove and reinsert the bobbin case and

pull on the thread. The thread should pull

easily.

2.Check both bobbin (g) and bobbin case.

1.Remove and reinsert needle. (flat side

towards the back)

2.Replace the needle.

3.Choose a needle size to suit the thread and

fabric.

4.Use the correct presser foot.

1.Replace the needle.

2.Insert the needle correctly (flat side towards

the back)

3.Choose a needle size to suit the thread and

fabric.

4.Use the correct presser foot.

1.Thread the machine correctly.

2.Thread the bobbin case as illustrated.

3.The needle size must suit the fabric and

thread.

4.Correct the thread tension.

1.Use a finer needle.

2.Check the thread tension.

1.Use stronger thread.

2. Rethread the bobbin case and insert correctly.

3.Do not pull on the fabric. It must be

automatically moved by the machine.

1.Lubricate as described.

2.Clean the hook and feed dog as described.

3.Only use good quality sewing machine oil.

4.Replace the needle.

Proceed according to the directions on page

77, "Setting up the thread spool pins".

Remove the upper thread and bobbin case,

turn the handwheel (21) backwards and

forwards by hand and remove the thread

remains. Lubricate as described.

GB / IE 91

Trouble shooting guide

Maintenance

HI I have Silvercrest 114195 this machine. How do I lower the feed dog or teeth? Or do I have to buy a plate cover so that I can do free hand embroidery sewing. Any reply is appreciated! Submitted on 3-11-2021 at 14:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 114195 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNMD 33 A1 - IAN 114195 Manual

Product: