646919
46
Zoom out
Zoom in
Previous page
1/55
Next page
- 44 -
Preparing the appliance
Remove all packaging materials and any
protective film on the surface of the housing.
DO NOT
remove the light grey flim-
mer cover plate, which is mounted
in the cooking area to protect the
magnetron.
Insert the plug into a power socket.
Use a 230 - 240 V
~
, 50 Hz, mains power
socket with a 16A fuse. It is recommended that
the microwave oven is powered from its own
ring main. If you are unsure about how to con-
nect the microwave oven, consult a specialist.
Before the first regular usage of the microwave oven
the appliance must be heated up to remove any
remaining production residues.
Without foodstuffs or accessories (glass plate 3, star
roller 4 and grill stand t), switch the appliance on
in the mode Grill:
Press the button Grill once 6 .
With this you select the Grill operation.
In the display 1 appears the symbol and
the symbol blinks. This indicates readiness
to start.
Adjust the control dial q to a cooking time of
10 minutes.
Press the button Start/Quick start q to
start the grilling process.
Notice!
On the first usage, the generation of light smoke and
a slight smell can occur, this is due to the production
residues. This is unharmful. Provide for sufficient
ventilation. For example, open a window.
After 10 minutes, the appliance switches itself
off automatically. Signal tones sound. Open the
door. Wait until it has cooled down completely.
Remove the plug from the mains power socket
then, after cleaning the appliance with a moist
cloth, dry it carefully.
Inserting accessories
Place the star rotator 4 centrally on the drive
shaft in the cooking area. Ensure that it slides
completely onto the axle and is firmly seated.
Place the glass plate 3 centrally on the star
rotator. The three rollers must be seated on the
leading edge on the glass plate 3.
Operation
Setting the Clock
When you take the microwave oven into use for the
first time, or there has been a power cut, the display 1
indicates "1 : 0 1".
1. Press the button Clock 9 . "Hr 12" appears
in the display 1.Press the button Clock 9
once again should you wish to switch to the 24-
hour mode.
2. By turning the control dial q programme in the
current hour. The clock symbol in the di-
splay 1 blinks.
3. Press button Start/Quick Start q . The
minute indicator appears.
4. By turning the control dial q, programme in the
current minute.
5. When the clock is correctly set, press the Start/
Quick Start button q . The clock symbol
in the display 1 glows continuously and
the colon indicates, by blinking, that the clock is
running.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SMW 800 A2 - IAN 74208 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SMW 800 A2 - IAN 74208 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info