Manual Silvercrest SLG 10 A1 - IAN 70999 USB Charger (page 1 of 4) (English)

565793

Zoom out

Zoom in

1/4

USB Charger SLG 1.0 A1

Operating and Safety Instructions

V 1.5

IAN 70999

Before you use this device for the first time

please read and follow these instructions, even if

you are familiar with handling electronic devices!

Keep the instructions and pass them on with the

device if applicable.

In the following, this symbol indicates risks which

could result in personal injury or damage.

Package Contents

 USB Charger SilverCrest SLG 1.0 A1

 User's Manual

Safety Instructions

Intended Use

The SLG 1.0 A1 USB charger adapter is intended to be

used exclusively to charge devices with a USB charger

receptacle using a 110/240 V AC socket. Any use other

than that mentioned above does not correspond to the

intended use.

The manufacturer accepts no liability if:

 the USB charger adapter is not used in accordance

with the intended use;

 the USB charger adapter is damaged or operated

when incomplete or modified;

 devices are connected which cannot be charged via

USB. Check the documentation for the device you

wish to connect.

This is an information technology device. It may only be

used for private purposes, not for industrial or

commercial purposes.

General safety instructions

 Electrical devices should not be operated by children

or people with mental or physical disabilities. Do not

allow these people to use electrical devices when not

under supervision. They may not understand that

they can be dangerous.

 Small parts can represent choking hazards. Please

also note that there is a risk of suffocation if airways

are blocked by the packaging film.

 If you notice any smoke, unusual noises or strange

smells, immediately unplug the USB charger adapter

from the mains socket. If this occurs the device

should no longer be used and should be inspected

by authorized service personnel.

Operational safety

Do not connect devices which contain batteries to

the USB charger adapter, as these can explode

during the charging process.

 The automatic power-off feature of the USB charger

adapter does not fully disconnect the device from the

mains. Unplug it from the power outlet to fully

disconnect it from the mains.

 Never open the housing of the device. Opening the

housing exposes you to lethal electric shocks.

 Only use the USB charger adapter in a power socket

which is easy to access so that it can be quickly

disconnected in the event of a problem (smoke,

burning smell).

 Before stormy weather and/or when there is the

danger of lightning, disconnect the USB charger from

the mains. This will protect your USB charger and the

connected device from damage due to lightning

strike.

 A damaged or incorrectly installed power outlet can

cause a fire or electric shock. The USB charger

adapter should therefore only be connected to power

sockets which are undamaged, fully assembled and

properly installed.

 There is also a risk of fire if the USB charger adapter

is not fully inserted into the power socket, resulting in

a loose connection.

 Do not use an adapter plug or extension cable which

is damaged or that does not meet the required safety

standards.

 Please also remember that children may be able to

unplug the USB charger from the power socket and

gain access to an exposed power socket.

 To disconnect a cable, pull on the plug of the USB

charger adapter, not the cable. Make sure that the

cable is not kinked and is not in anyone's way.

 If the USB charger adapter is exposed to broad

temperature fluctuations condensation can form and

cause moisture which can produce a short circuit. If

this occurs, use the USB charger adapter only after it

has reached the ambient temperature.

Operating Environment/Environmental

Conditions

 Keep the USB charger adapter away from moisture.

Do not place any recipients containing liquids

(beverages, vases, etc.) next to the device. Avoid

vibrations, dust, heat and direct sunlight. These can

damage the charger.

Controls and Display Elements

Pos.

Function, controls

POWER button: keep this button pressed for at least 1

second to start the charging process for the connected

device. The charging LED [3] will flash for a few

seconds whilst charging is being prepared. During

charging, the charging LED [3] will light continuously.

The USB charger adapter powers off automatically as

soon as the connected device is fully charged.

Cable holder. Wind the USB cable (max. 1.2m) of the

device you wish to charge here.

Charging LED (visible when illuminated only).

Device connector. Connect the USB cable of the device

you wish to charge here.

Power plug. Plug it into a properly installed power

socket that is easy to access.

Cleaning

Disconnect the USB charger adapter from the

power socket and remove all connected devices

prior to cleaning otherwise your life is in danger

due to electric shock.

Furthermore, there is a risk of a short circuit causing

damage to the USB charger adapter and the

connected device.

If dirty, clean with a dry cloth or a slightly damp cloth for

stubborn dirt. Do not use any solvents, irritants or

gaseous cleaners. No moisture must penetrate into the

adapter.

Disposal of Old Devices

The product bears the symbol of a rubbish bin

crossed out. The European Directive

2002/96/EC therefore applies.

All electrical and electronic devices must be disposed

of separately from household waste at official disposal

centres. For further information, contact your local

government, disposal bodies or the shop where you

bought the device.

Legal Requirements

 The USB charger adapter fulfils all relevant norms

and standards relating to conformity. Any

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SLG 10 A1 - IAN 70999 USB Charger in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SLG 10 A1 - IAN 70999 USB Charger

Silvercrest SLG 10 A1 - IAN 70999 USB Charger User Manual - German - 4 pages

Silvercrest SLG 10 A1 - IAN 70999 USB Charger User Manual - German - 6 pages

Silvercrest SLG 10 A1 - IAN 70999 USB Charger User Manual - Dutch - 4 pages

Silvercrest SLG 10 A1 - IAN 70999 USB Charger User Manual - French - 6 pages

Silvercrest SLG 10 A1 - IAN 70999 USB Charger User Manual - Italian - 4 pages

Silvercrest SLG 10 A1 - IAN 70999 USB Charger User Manual - Italian - 6 pages

Silvercrest SLG 10 A1 - IAN 70999 USB Charger User Manual - Spanish - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SLG 10 A1 - IAN 70999 USB Charger Manual

Product: