Manual Silvercrest SKF 2300 A1 - IAN 66928 (page 10 of 14) (English)

575421

Zoom out

Zoom in

1/14

- 8 -

• The frying basket 3 and the stainless steel con-

tainer 4 can be cleaned in the dishwasher.

They are suitable for dishwashers.

• Clean the housing and the appliance lid with a

damp cloth. If required, use a mild detergent on

the cloth.

• Clean the operating/heating element 5 with a

moist cloth.

Note:

• Should you wish to clean the permanent-metal

filter 2 inside the appliance lid, then place the

appliance lid in warm water with a mild detergent.

• Allow it to soak for a short period and then slew

it back and forth.

• Rinse the appliance lid off with clear water.

• Dry it and then place it upright on its side so that

any excess water still in the inside of the lid can

drain away.

• Dry it off again and ensure that there is no moistu-

re below the rubber lip on the underside of the ap-

pliance lid. If necessary, lift the rubber lip to dry it.

Be aware that the lid MUST be completely dry be-

fore re-use!

• Reassemble the deep fryer in the reverse order.

• Lift the appliance with the assistance of the lateral

carrying recesses.

• Wrap the power cable around the power cable

retainer 7.

• Store the appliance with the appliance lid closed.

This will keep the inside of the deep fryer clean

and free of dust.

Tips

Home-made chips

• Potatoes intended for frying should be faultless

and not germinating.

• Use potato varieties suitable for frying, such as

"King Edward", "Morris Piper", "Cara" etc.

• After peeling, cut the potatoes according to the

intended preparation (chips or slices).

• Soak the potatoes for approx one hour before

frying. This will help remove a portion of the

sugar content, which is one of the constituent

products for the formation of acrylamides.

• Carefully dry the potatoes.

• Always fry home-made potatoes twice:

• first for 10-12 minutes at 160°C then for 3-4 mi-

nutes at 170°C, depending on the desired degree

of browning.

• Deep frozen chips are pre-cooked and thus only

need to be fried once. Comply with the instruc-

tions on the packaging.

Frozen Foods

Deep frozen foodstuffs (-16 to -18 °C) cool the oil

or fat to a considerabe extent, because of this they

do not cook fast enough and possibly also soak up

too much oil of fat. To avoid these occurences, pro-

ceed as follows:

• Do not attempt to fry large volumes all at once.

The food to be fried must be completely covered

with cooking oil/fat after lowering the frying

basket 3.

• Heat the oil for at least 15 minutes before inserting

the frozen foodstuffs.

• Adjust the temperature controller 8 to the tem-

perature specified in these operating instructions

or on the packaging of the foodstuff.

• Preferably, allow the deep frozen food to thaw

at room temperature. Remove as much ice and

water as possible before inserting the food into

the deep fryer.

IB_66928_SKF2300A1_LB6 28.04.2011 14:57 Uhr Seite 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2300 A1 - IAN 66928 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKF 2300 A1 - IAN 66928

Silvercrest SKF 2300 A1 - IAN 66928 User Manual - German, Dutch, French, Italian - 54 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKF 2300 A1 - IAN 66928 Manual

Product: