654501
55
Zoom out
Zoom in
Previous page
1/59
Next page
53
SIKP 2000 B2
GB
Heating up
After you have switched the appliance on ...
Using the buttons + 7 and --- 9, select the desired power level (L1 -
L10). The default setting is a medium power level (L5). You can also
press and hold the buttons + 7 and -- 9 until the desired power level
is set.
or:
Press the button Cooking q to be able to select the temperature. In the
display 8 appears “120“ and below the display 8 the symbol “°C “.
Using the buttons + 7 and --- 9 then select the desired temperature
(60 - 240°C). The default setting is a temperature of 120°C. You can
also press and hold the buttons + 7 and --- 9 until the desired tempera-
ture is set.
NOTICE
If you are using the setting "Temperature" for cooking, the appliance heats
the cookware to the selected temperature. If the set temperature should fall,
the appliance heats it up again. The temperature is maintained.
With the setting "Power level", the cookware is heated at diff erent rates. The
higher the selected power level, the faster the cookware is heated.
NOTICE
Warming up starts as soon as one of these buttons is activated. The setting
can be adjusted at any time during the current usage.
Countdown time (Timer)
You can pre-select a time period from 0 - 180 minutes after which the cooking
area 1 should switch itself off .
First start the warming-up, as described above.
Then press the button Timer 0. The control lamp Timer e glows, “120“
appears in the display 8 and “min“ appears below the display 8.
Using the buttons + 7 and --- 9 you can select the desired countdown time
from 0 - 180 minutes ...
forward in 1-minute increments (if you press and hold the button + 7,
the time runs forward in 10 minute increments),
backward in 10 minute increments.
When you have set the countdown time, and press no other button, the
countdown will start automatically. The set power level/temperature appears
alternately with the remaining countdown time in the display 8. If you have
set a countdown time of 0, the appliance switches off after 5 seconds.
IB_74434_SIKP2000B2_LB2.indb Abs2:53IB_74434_SIKP2000B2_LB2.indb Abs2:53 10.05.12 14:0010.05.12 14:00
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SIKP2000B2 - IAN 74434 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SIKP2000B2 - IAN 74434 in the language / languages: French as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SIKP2000B2 - IAN 74434

Silvercrest SIKP2000B2 - IAN 74434 User Manual - English, German, Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info