Manual Silvercrest SFS 110 A1 - IAN 104351 (page 11 of 100) (English, German, Dutch, French, Swedish, Finnish)

622810

Zoom out

Zoom in

1/100

SFS 110 A1

Welding a tube ﬁ lm

NOTES ON THE FILM

► The ﬁ lm width may not exceed 28 cm. Otherwise it cannot be welded

correctly

► Use only nylon-PE ﬁ lms with a structure (points or grooves) on one side and

that hav

e a structure (points or grooves) on one side and a thickness of

approximately 0.17 - 0.29 mm (170 - 290 μ).

Otherwise the weld seam will not be tight and the appliance may be da-

maged. You can recognise ﬁ lms of this type from the information on the

packaging. The quality of the weld seam will vary depending on the type

and thickness of the ﬁ lm.

► The supplied ﬁ lm is suitable for temperatures between -20°C and +100°C.

1) Cut the desired length for your bag from the tube ﬁ lm using a pair of scissors.

Cut as straight as possible.

2) Open the appliance lid 1 by pressing the lid release 8 and opening the

lid 1 upwards.

3) Lay the open end of the bag as far into the appliance so that the opening of

the bag is located centrally under the lower sealing ring 5. The bag should

be inserted no further than the rear limiters 6 and must lie between the front

limiters 7. If the bag lies over one or both of the two limiters 7, then the

bag cannot be correctly welded.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFS 110 A1 - IAN 104351 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 1,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SFS 110 A1 - IAN 104351 Manual

Product: