539995
112
Zoom out
Zoom in
Previous page
1/116
Next page
SilverCrest SFB 10.1 C3
110 - English
The All on/All off feature
If you have programmed your remote control to control several devices,
this feature lets you switch all of them on or off at the same time by just
pressing one button. To do so, press and hold the button (3) for
a few seconds. This switches all the devices on or off at the same time.
Depending on the number of devices programmed, this can take up to 10
seconds. The following is required for this feature to work:
A clear line of sight between the remote control and each device
you want to switch on/off.
All devices need to support powering on/off via remote control.
The automatic code search, brand code search and macro
functions must be disabled.
Troubleshooting
Device does not respond to the remote control commands
Please check that you have selected the correct device with the
remote control.
Point the remote control directly at the device.
Check if the remote control has been programmed with the correct
code for your device.
It is possible that the device is not compatible with programming
using the code list. In this case, please program the remote control
by using the learn function.
The batteries are low or empty. Replace the batteries with new
batteries of the same type. See also the chapter “Inserting the
batteries”.
Some buttons do not work properly
It is possible that not all functions of your original remote control
are supported.
The code entered does not support all the functions of your device.
Try to find a code that matches your device better.
Program any buttons that do not work properly using the learn
function.
Before programming a device button using brand code search or
automatic search, please carry out a RESET for this button first. If
this device had previously been programmed using the learn
function, any learned keys would not be overwritten by the new
programming.
The LCD display does not work
The batteries are low or empty. Replace the batteries with new
batteries of the same type. See also the chapter “Inserting the
batteries”.
TOP Text buttons not working in Teletext mode
While the “PLAYBACK” function is enabled, the
recording/playback control buttons (5) are used to control the
selected tape or disc player. In this case, these buttons cannot be
used for the TV TOP Text functions.
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFB 10.1 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFB 10.1 C3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info