642279
46
Zoom out
Zoom in
Previous page
1/50
Next page
GB
 43
SEM 1100 B3
Descaling the appliance
Descale the appliance regularly. The appliance should be descaled after about
1- 2 months (at approx. 4 espresso preparations per day). Depending on the
hardness of the water in your area, this figure may differ.
For descaling, use a commercially available descaler for espresso machines.
Proceed as described in the instructions for usage of the descaler.
If you do not have any descaling products, you can use citric acid and proceed
as follows:
1) Fill the water tank to the marking MAX.
2) Dissolve 2 tablespoons (about 30 grams) of citric acid (available in drugstores
or chemists) into the water.
3) Replace the water tank into the appliance.
4) Switch on the appliance using the On/Off switch . The steam control
is closed.
5) Insert the sieve holder 1 without the espresso sieves %+ back into the
appliance and place a cup under the sieve holder 1.
6) As soon as the green heat-up indicator lamp lights up, press the "Espresso"
button
so that it clicks in.
7) Allow around 2 cups (approx. 250 ml) of water to run through and then stop
the process by pressing the "Espresso" button again.
8) Hold a container under the milk frother .
9) Press the "Steam" button
down so that it clicks into place and wait
until the green heat-up indicator lamp lights up. Slowly turn the steam
control to the position "+". Allow the appliance to create steam for
about 2 minutes.
10) After 2 minutes, close the steam control , then press the "Steam" button
again so that no more steam is generated.
11) Let the scaling agent take effect for about 15 minutes.
12) Repeat steps 6 - 11 three times.
13) Then press the "Espresso" button
down so that it clicks in, let the water
run through until the water tank is empty.
14) Rinse the water tank with clean water and then fill it with clean water up
to the Max marking.
15) Press the "Espresso" button down so that it clicks into place and wait
until the green heat-up indicator lamp lights up.
16) Allow the water to run through.
17) Repeat steps 14 - 16 three times.
18) Refill the water tank with water.
46


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-sem-1100-b3---ian-274989

Reset search

  • I press the button to get coffee but the water doesn't run. What to do? Submitted on 25-2-2017 at 20:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SEM 1100 B3 - IAN 274989 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SEM 1100 B3 - IAN 274989 in the language / languages: English, German as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SEM 1100 B3 - IAN 274989

Silvercrest SEM 1100 B3 - IAN 274989 User Manual - French - 69 pages

Silvercrest SEM 1100 B3 - IAN 274989 User Manual - Italian, Portuguese, Spanish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info