618613

Silvercrest SDBE 2600 A1 - IAN 114193 Manual

33
Zoom out
Zoom in
Previous page
1/36
Next page
28
SDBE 2600 A1
GB
After use
■ Remove the power plug from the mains power
socket.
■ Empty the water tank and clean the sole of the
iron 0.
■ Place the cooled-down steam iron on the base 9.
Drip-Stop function
With conventional steam irons, water can drip from
the sole of the iron 0 at low temperatures.
This iron, however, possesses a new feature: the
DRIP-STOP function. At low temperatures the iron
automatically switches off the steam-blast function.
Then set a suitable temperature with the tempera-
ture control 6. As soon as this is reached, steam
production is resumed.
Automatic switch-off
This steam iron is fi tted with an automatic switch-off
system. This stops the iron from heating up.
If the iron is resting on its sole 0 and is not moved
for about 30 seconds, there will be a warning beep
and the control lamp for the automatic switch-off 7
fl ashes. The iron will stop heating up. To deactivate
the automatic switch-off , lift up the iron and move
it gently from side to side. The control lamp for the
automatic switch-off 7 goes out and the iron will
heat up again.
If the iron is resting on its base 9 and is not moved
for about 8 seconds, there will be a warning beep
and the control lamp for the automatic switch-off 7
fl ashes. The iron will stop heating up. To deactivate
the automatic switch-off , lift up the iron and move
it gently from side to side. The control lamp for the
automatic switch-off 7 goes out and the iron will
heat up again.
NOTE
The automatic switch-off is not intended as a
substitute for removing the plug from the mains
power! This is merely intended to reduce the fi re
hazard if you forget to switch of the iron!
Cleaning
Self-cleaning function
■ Fill the water tank to the "MAX" marking.
■ Insert the plug into the mains power socket.
■ Move the temperature control 6 to the "MAX"
position.
■ Set the steam control 3 to maximum steam
power.
■ Allow the steam iron to heat up until the heat
control lamp 7 goes out and then lights up
again.
■ Hold the steam iron horizontally over a suitable
container.
■ Press and hold down the self-clean button q.
Move the steam iron back and forth a little.
Steam and boiling water will fl ow from the
steam exit holes in the sole of the iron 0. Any
impurities that may be present are fl ushed out.
■ Release the self-clean button q as soon as all
of the water has fl own out of the water tank.
IB_114193_SDBE2600A1_LB2.indb 28 09.07.15 11:41
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDBE 2600 A1 - IAN 114193 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDBE 2600 A1 - IAN 114193 in the language / languages: French as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDBE 2600 A1 - IAN 114193

Silvercrest SDBE 2600 A1 - IAN 114193 User Manual - English, German, Dutch, Swedish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info