618678

Silvercrest SDB 2400 A1 - IAN 93488 Manual

36
Zoom out
Zoom in
Previous page
1/39
Next page
33
SDB 2400 A1
GB
Automatic switch-off
This steam iron is fi tted with an automatic switch-off
system. This stops the steam iron from heating up.
When the steam iron is resting on its sole and is not
moved for approx. 30 seconds, 6 warning beeps
will sound, "PAUSE" appears and the display 1
lights up red. After a few seconds, the display illumi-
nation 1 switches off . The steam iron will stop
heating up.
To deactivate the automatic switch-off , lift up the
steam iron and move it gently from side to side.
The display 1 lights up blue, the previously set
temperature level is shown and the steam iron
heats up again.
When the steam iron is resting on its base 7 and is
not moved for approx. 8 minutes, 6 warning beeps
will sound, "PAUSE" appears and the display 1
lights up red. After a few seconds, the illumination of
the display 1 switches off . The steam iron will stop
heating up.
To deactivate the automatic switch-off , lift up the
steam iron and move it gently from side to side.
The display 1 lights up blue, the previously set
temperature level is shown and the steam iron
heats up again.
NOTE
The automatic switch-off is not intended as a
substitute for r
emoving the plug from the mains
power!
It is merely designed to prevent the appliance
from overheating and helps to avoid unneces-
sary power consumption.
It does not, however, in itself provide fi re protec-
tion, for instance, if you place and leave the hot
steam iron on fl ammable material.
Cleaning
Self-cleaning function
1) Fill the water tank to the marking MAX.
2) Insert the plug into the mains power socket.
3) Set the temperature level to 9/MAX
4) Set the steam regulator 4 to maximum steam
power.
5) Allow the steam iron to heat up to the set
temperature.
6) Hold the steam iron horizontally over a catch-
ment receptacle.
7) Press and hold down the self-clean button 8.
Steam and boiling water fl ows from the steam exit
holes in the sole of the iron. Impurities that may be
present are washed out.
8) Release the self-clean button 8 as soon as all
of the water has run out.
9) Iron over a towel or old piece of material a few
times to dry the sole of the iron thoroughly.
10) Remove the plug from the mains power socket.
11) Allow the steam iron to cool down before
placing it in storage.
Housing
WARNING –
RISK OF ELECTRIC SHOCK!
► Always remove the plug from the mains power
s
ocket before cleaning the appliance.
► Never open the appliance housing! Otherwise
ther
e is a risk of a fatal electric shock.
WARNING – RISK OF INJURY!
► Allow the appliance to cool down before
cleaning it! Other
wise, there is a risk of burns!
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDB 2400 A1 - IAN 93488 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 2400 A1 - IAN 93488 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info