DANGER for children and people with disabilities
~ Packing materials are not children’
packing material. There is a risk of suffocation.
~ This device is not designed to be used by people (including children) with
limited physical, sensory or mental capabilities or people without adequate
experience and/or understanding, unless they are supervised by someone
responsible for their safety or are instructed by them on how to use the
device.
~ Children must not play with the device.
~ Keep the device out of the reach of children.
DANGER from the battery
~ This device must not be thrown into Ƃ re. DANGER OF EXPLOSION!
~ The device must not be covered while the battery is charged.
~ The device must only be charged in a dry environment.
~ The device is provided with a lithium polymer battery.
The battery cannot be removed.
This device must not be opened.
- Completely dispose of the device.
~ Do not expose the device to direct sunshine or heat. The ambient tempera-
ture should not be lower than | C or higher than | C. Please remember
that in a car the storage temperature may signiƂ cantly exceed | C.
~ If the device is to be charged via a USB 2.0 or 3.0 computer socket, at least
one more USB 2.0 or 3.0 computer socket must be available. Unless this is
the case, the loudspeaker must not be charged.
~ The battery may only be charged with the original accessory (USB charger
cable).
Bluetooth Mini Speaker SBL 3 A1
Thank you for your trust!
Congratulations on your new Bluetooth mini speaker
For safe handling of the device and in order to get to know the entire scope of
features:
r Thoroughly read these user instructions prior to initial use.
r Above all, observe the safety instructions!
r The device should only be used as described in these user in-
structions.
r Keep this copy of the user instructions for future reference.
r If you pass the device on to someone else, please include this
copy of the user instructions. The user instructions are a part of
the product.
We hope you enjoy your new Bluetooth mini speaker!
Notes on trademarks
The Bluetooth
®
word mark and the Bluetooth logo (
®
) are registered trade-
marks of the Bluetooth SIG Inc. (Special Interest Group), any use of the trade-
mark by the Hoyer Handel GmbH is effected within the framework of a licence.
All other names and trademarks are the property of their respective owners.
Intended purpose
This is an entertainment electronics device. The Bluetooth speaker is intended
for playing sound from audio devices via Bluetooth or using the 3.| mm jack
socket.
The device is designed for private, domestic use. This device must not be used
for commercial purposes.
Do not make any changes or carry out any repairs. The manufacturer is not li-
able for damage or malfunctions caused by improper repairs or modiƂ cations.
This is the sole responsibility of the user
Safety instructions
Warnings
If necessary, the following symbols and warnings will be used in these user
instructions:
DANGER! This symbol, in combination with the note “Danger” means
a high risk. Failure to observe this warning may result in injury to life
and limb.
WARNING! This symbol, in combination with the note
means a moderate risk. Failure to observe this warning may result in
injury or serious material damage.
CAUTION: low risk: failure to observe this warning may result in minor injury
or material damage.
NOTE: circumstances and speciƂ cs that must be observed when handling the
device.
GB
/
IE
/
MT
/
CY
WARNING! Risk of material damage
~ If you notice any irregularities (e.g. unusual noises, strange smells or smoke
developing) turn the device off immediately and remove all cables. Do not
use the device any longer.
~ If the device is moved from a cold location to a warm location, condensate
may form in the device. Leave the device switched off for a few hours to
become acclimatised.
~ Protect the device against damage, e.g. from:
drips and splashes of water
- heat, direct sun radiation and open ƃames (e.g. candles)
impacts and similar violent effects
~ Protect the cable against damage, e.g. from:
sharp edges
hot places
clamping or crushing
~ Do not use any astringent or abrasive cleaning agents.
~ To avoid any ha\ arƂ cations to the device. 4 epairs must
be carried out by a specialist workshop or the Service Centre.
Items supplied
1 Bluetooth speaker
1 USB charger cable (Type A on micr|
1 3.| mm stereo jack cable|
1 copy of the user instructions
If the delivery is incomplete or defective, please contact the responsible service
centre of the manufacturer (see “W1;'4 Handel GmbH”).
Overview
34 5
6
7
USB charger cable for micro
USB/Type| A
3.| mm stereo jack cable
3 Micro USB port
4 Jack socket
5 Loudspeaker
6 On/off button
|
7 Button
8 Button X
9 Button
Pairing button
Operating mode LED
Charging LED
Before using the device for the Ƃ rst time
r 4emove all packing material.
r 4emove the protective Ƃlm on the underside of the device.
r Check that the device is undamaged. A damaged device must never be used.
Charging
WARNING!
~ The device must not be covered while the battery is charged.
~ The device must only be charged in a dry environment.
NOTES:
r When using a USB power unit (not included in items supplied), comply with
its user instructions. The USB power unit must be able to output at least 1A
output current.
r Charge the battery fully before using the device.
r The maximum battery capacity is reached after approx. - |charging cycles.
r At a battery capacity of less than approx. 10%, an audio signal will sound
once and the charging LED
will light up red until the device automatical-
ly switches itself off.
r The charging time of an empty battery is approx. |2-2. |hours. It is possible
to play back during the charging process, however
ing time.
1. Connect the micro USB plug of the USB charger cable| to the micro USB
port|3 of the device.
2. Connect the USB-A plug of the USB charger cable| e.g. to the USB port of
a PC or to a USB power unit (not included in scope of supply). The charging
LED| is lit red and goes off when the battery is fully charged
.
Operation
Functions of the buttons
NOTE: depending on the software of the mobile device it may be that not all
functions of all mobile devices are supported. This is not a device error
Button Function
|6
r Switching on /off: press for approx. 2 sec., a brief sound
sequence is audible.
|7
r Press ƃy: increase the volume (audio signal at maximum
volume)
r Keep pressed: Next track
X|8
r Press ƃy: Pause / Play
|9
r Press ƃy: reduce the volume (audio signal sounds at
minimum volume)
r Keep pressed for 1x: Start of track
r Keep pressed for 2x: Previous track
|
r Press until a sound can be heard. The active connection is
interrupted and a new one can be built up.
LED indicators
LED indicator Function
Charging LED is lit red Battery is being charged / or the battery
capacity is under 10%
LED ƃ ashes rapidly
in white
Device sends device identiƂ cation in order
to establish a Bluetooth connection (pairing)
LED ƃ ashes white very
slowly
Bluetooth connection is established
LED is lit green The plug of the 3. | mm stereo jack cable|
is plugged into the jack socket|4
(no Bluetooth function)
Establishing a Bluetooth connection
NOTES:
r The Ƃ cation of the loudspeaker is “SBL|3 |A1”
r After turning it on, the loudspeaker automatically tries to reconnect to the last
paired device or to establish a new connection.
r Please observe that the establishing of the connection may vary slightly de-
pending on the audio device and the software used.
r The Bluetooth range is 10 metres.
r The loudspeaker switches off if no Bluetooth connection can be established
within 10|minutes.
r With moderate volume settings, the loudspeaker can be used for a period of
approx. 1| hours with the Bluetooth connection established.
BLUETOOTH MINI SPEAKER SBL 3 A
Operating Instructions
GB
/
IE
/
MT
/
CY
IAN: 3 3 7
ID: SBL 3 A1_18_V1.8
r If you pass the loudspeaker on to someone else, in order to protect your
data and your privacy, you should disconnect the Bluetooth connection to
the device and delete it from the connection list on your smartphone.
1. If necessary, remove the plug of the 3.|mm stereo jack cable| from the
jack socket|4 .
2. Switch on the loudspeaker device using the button
|6. An audio signal
sounds. The LED|
ƃashes rapidly in
white
. The Bluetooth identiƂ cation of
the device is sent.
3. Switch on the audio device (e.g. smartphone) and start the Bluetooth
connection. The audio device will now receive the device identiƂ cation
“SBL| 3| A1”
. Establish a connection to the Bluetooth speaker on the audio device. Both
devices are now interconnected. The LED| on the device ƃ ashes slowly
in white and an audio signal sounds.
NOTE: it is possible that audio devices remember the identi Ƃcation of the
loudspeaker
be established manually while the Bluetooth function is active.
5. Now play back a music track on the audio device. The sound is played
back via the loudspeaker|5 .
