118154
16
Zoom out
Zoom in
Previous page
1/18
Next page
20 GB
Start recording
· Press and hold the
SCN
REC•
button bmfor
two seconds. The display
7reads: [RPT
MMC].
· Press and hold within fi ve seconds the [ENT
BD] button
bnfor two seconds. The display
7reads: [RECORD], followed by [R] (fl ashing),
the pre-set number (e.g. [01]) and the duration
of the recording (e.g. [19.58]).
End recording
· Press the
BD
ENT
button bn.
Start deleting
· Start playing the track you wish to delete.
· Press and hold the
SCN
REC•
button bmfor
two seconds.
The display
7 reads: [DELETE].
· Press the
BD
ENT
button bn. The current track
is automatically deleted.
í Remote control
The car radio – recorder can also be operated us-
ing the remote control
Familiarise yourself on how to use the buttons of
the same function on the remote control (see fi g.
F).
Ensure that the front edge of the remote control is
directed toward the IR sensor
5of the control
panel
1
· Please observe that the AF function can only
be performed with the
AF
button bodirectly on
the control panel
1.
· Also observe the changed procedure on how
to:
Set the volume
· Increase the volume by pressing the
VOL
but-
ton
gt.
· Reduce the volume by pressing the
VOL
button
hm.
Insert the battery
· Activate the unlock button
isand pull the bat-
tery holder
irfrom the battery compartment
iq(see Fig. G).
· Place a Lithium battery type CR2025, 3 V DC
into the battery holder
irso that one side
marked with + faces up. Then slide the battery
holder
irinto the battery compartment iqun-
til it distinctly catches.
í Troubleshooting
· Operate
̈ Error
̈ Cause
̈
Remedy
̈ The device can not be switched on or the
display indicates ERROR.
̈ The connections for the 12 V DC power supply
are faulty.
̈
Have the errors remedied. Then press the RE-
SET button
drwith the tip of a biro.
or
̈ The fl at blade fuse 7.5 A euin the fl at fuse
jack
etis defective.
̈
Replace the used fl at blade fuse against a new
at blade fuse 7.5 A. Then press the RESET
button
drwith the tip of a biro.
or
̈ A 8 A fuse of the fuse holder of the 12 V DC
power supply is defective.
̈
Replace the used fuse against a new fl at
blade fuse 7.5 A. Then press the RESET
button
drwith the tip of a biro.
or
̈ The device is defective.
̈
Contact your national service point.
̈ The device can not be operated
̈ The control panel 1is incorrectly connected.
̈
Ensure the fault-free connection of the control
panel
1.
or
̈ The battery of the remote control is exhausted.
̈
Replace the used battery against a new Lithi-
um battery type CR2025, 3 V DC.
or
̈ The IR sensor 5of the control panel 1and/
or the remote control may be dirty.
Save/delete recording for SD or MMC / Remote control / Troubleshooting
KH2389_Radio_content_UK.indd 20KH2389_Radio_content_UK.indd 20 08.09.2005 11:39:07 Uhr08.09.2005 11:39:07 Uhr
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH2389 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH2389 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest KH2389

Silvercrest KH2389 User Manual - German - 22 pages

Silvercrest KH2389 User Manual - Dutch, French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info