751815
27
Zoom out
Zoom in
Previous page
1/29
Next page
GB / IE / NI106
Maintenance
Trouble shooting guide
Problem Cause Correction
Upper thread
breaks 1.The machine is not threaded
correctly. 1.Rethread the machine.
2.The thread tension is too tight. 2.Reduce the thread tension (3). (lower
number)
3.The thread is too thick for the needle. 3.Use a larger needle.
4.The needle is not inserted correctly. 4.Remove and reinsert the needle. (at
side towards the back)
5.The thread has become wound
around the bobbin winder spindle (14). 5.Remove the bobbin (g) and unwind the
thread.
6.The needle is damaged. 6.Replace the needle.
Lower thread
breaks 1.The bobbin case is not inserted
correctly. 1.Remove and reinsert the bobbin case
and pull on the thread. The thread
should pull easily.
2.The bobbin case is threaded wrongly. 2.Check both bobbin (g) and bobbin case.
Skipped stitches 1.The needle is not inserted correctly. 1.Remove and reinsert needle. (at side
towards the back)
2.The needle is damaged. 2.Replace the needle.
3.The wrong size needle has been
used. 3.Choose a needle size to suit the thread
and fabric.
4.The wrong presser foot is installed. 4.Use the correct presser foot.
Needle breaks 1.The needle is damaged. 1.Replace the needle.
2.The needle is not correctly inserted. 2.Insert the needle correctly (at side
towards the back)
3.Fabric too thick/ needle size wrong. 3.Choose a needle size to suit the thread
and fabric.
4.The wrong presser foot is attached. 4.Use the correct presser foot.
Loose stitches 1.The machine is not correctly threaded. 1.Thread the machine correctly.
2.The bobbin case is not correctly
threaded. 2.Thread the bobbin case as illustrated.
3.Needle/ fabric/ thread combination is
wrong. 3.The needle size must suit the fabric and
thread.
4.Thread tension wrong. 4.Correct the thread tension.
Seams gather
or pucker 1.The needle is too thick for the fabric. 1.Use a ner needle.
2.The stitch length is wrongly adjusted. 2.Check the thread tension.
3.Fabric puckers. 3.Use a backing for ne or stretchy
fabrics.
Uneven
stitches,
uneven feed
1.The thread is too weak. 1.Use stronger thread.
2.The bobbin case is wrongly threaded. 2.Rethread the bobbin case and insert
correctly.
3.Fabric has been pulled when sewing. 3.Do not pull on the fabric. It must be
automatically moved by the machine.
The machine is
noisy 1.The machine must be lubricated. 1.Lubricate as described.
2.Fluff or oil have collected on the hook
or needle bar. 2.Clean the hook and feed dog as
described.
3.Poor quality oil has been used. 3.Only use good quality sewing machine
oil.
4.The needle is damaged. 4.Replace the needle.
The machine
jams Thread is caught in the hook. Remove the upper thread and bobbin
case, turn the handwheel (21) backwards
and forwards by hand and remove the
thread remains. Lubricate as described.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 326967 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326967 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 326967

Silvercrest IAN 326967 User Manual - German - 29 pages

Silvercrest IAN 326967 User Manual - Dutch - 29 pages

Silvercrest IAN 326967 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info