752553

Silvercrest IAN 321962 SMW 800 E2 Manual

64
Zoom out
Zoom in
Previous page
1/238
Next page
SilverCrest SMW 800 E2
62 - English
If you do not think the food needs turning, do nothing and simply allow the programme to continue. After a
short time, “turn” disappears and the display (1) continues to count down the remaining time.
The display (1) shows a flashing “End” to indicate the end of the defrost process and beeps 5 times. If the
microwave door is not opened, the 5 beeps are repeated every 2 minutes.
“End” flashes on the display (1) until the door is open.
9.7 Start time delay
This function allows you to programme the microwave so that a programme you select starts at the time you
want.
When using this function, please note the safety instructions concerning fire hazards in
chapter 2.
To delay the start time, it is crucial that the clock is set correctly.
The start time delay does not work for the “Defrost” programme, the “A-05” (heating)
programme and the “Microwave mode / Quick Start” function.
• Set the microwave function you want (microwave mode, grill mode, combination mode or automatic
programme).
Microwave mode: Press the Microwave button (12), select the power level and adjust
the cooking time you want using the rotary knob (9)
Grill mode: Press the Grill button (6), adjust to the grilling time you want using the rotary
knob (9).
Combination mode: Press the Combination button (7). Select the mode “C-1” or
“C-2” you want using the rotary knob (9).
Automatic programmes: Use the rotary knob (9) to select an automatic programme
(apart from A-05) and confirm this by pressing the Start/Quick Start button (9). Twist the
rotary knob to select the weight of the food.
• Press the Timer/Clock button (10). The hour digits flash on the display (1).
• Select the hour for the start time you want by twisting the rotary knob (9) and confirm by pressing the
Start/Quick Start button (9). The minutes digits flash on the display (1).
• Select the minute for the start time you want by twisting the rotary knob (9) and confirm by pressing
the Start/Quick Start button (9).
The programmed start time now flashes on the display (1). At the same time, the relevant symbols to match
the microwave function selected (microwave mode, grill mode, combination mode or automatic
programmes) also flash.
At the set start time, the unit beeps twice and the selected programme is started automatically.
It is possible to cancel the programmed start time and the whole process programmed at any time. To do
this, press the Stop button (8). The current time is now shown on the display (1).
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 321962 SMW 800 E2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 321962 SMW 800 E2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info