752553
52
Zoom out
Zoom in
Previous page
1/238
Next page
SilverCrest SMW 800 E2
50 - English
9.1.3 Setting the time
Hold down the Timer/Clock button (10) for approx. 3 seconds. “Hr 12” is shown on the
display (1). You can now switch between the 12 hour clock “Hr 12” and the 24 hour clock “Hr 24
by turning the rotary knob (9). Confirm by pressing the Start/Quick Start button (9). The hour digits
flash.
Select the current hour by twisting the rotary knob (9) and confirm by pressing the Start/Quick Start
button (9). The minutes digits flash.
Select the current minute by twisting the rotary knob (9) and confirm by pressing the Start/Quick Start
button (9).
You have now finished setting the time. The current time is displayed, even when the display lighting is
switched off.
9.1.4 Setting the kitchen timer
The microwave has a kitchen timer which you can use independently of the microwave. The time can be set
between 10 seconds and 95 minutes.
Press the Timer/Clock button (10).
Turn the rotary button (9) to set the time you want.
Press the Start/Quick Start button (9) to start the kitchen timer.
The time set now counts down. When the time is up, the appliance beeps and the current time is shown in
the display (1).
You can cancel the time countdown on the kitchen timer at any point by pressing the Stop (8) button.
The kitchen timer is cancelled and the current time is shown in the display (1).
While the kitchen time is set and counting down, you can use the microwave functions as normal. The
microwave function currently in use is shown in the display (1). Press the Timer/Clock button (10) to
show the current status of the kitchen timer for approx. 3 seconds. If the cooking or grilling process is
complete and the door (5) is opened, the display (1) shows the remaining time counting down on the kitchen
timer.
9.1.5 Setting the child lock
The child lock function gives you the option of preventing the microwave from being started by children or
other personnel who are not familiar with its use.
Activating the child lock: Press the stop button (8) for about 3 seconds until a beep sounds. The
symbol appears in the display (1).
The child lock is now activated. All the buttons and the rotary knob do not work.
Deactivating the child lock: Press the stop button (8) again for about 3 seconds until a beep
sounds. The symbol disappears in the display (1).
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 321962 SMW 800 E2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 321962 SMW 800 E2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info