752553

Silvercrest IAN 321962 SMW 800 E2 Manual

51
Zoom out
Zoom in
Previous page
1/238
Next page
SilverCrest SMW 800 E2
English - 49
• Place the roller ring (4) in the recess inside the cooking space.
• Insert the axle of the drive star (3) through the hole in the centre of the cooking space. Twist the drive
star (3) until it engages with the drive axle beneath the hole.
• Place the glass plate (2) centrally on the roller ring (4). The 3 glass lugs on the bottom of the glass
plate (2) should fit into the drive star (3).
• Close the door.
• Insert the mains plug into a suitable mains socket which meets the requirements in the “Technical
specifications” chapter. A beep sounds and the display (1) lights up for around 5 seconds.
The microwave must be connected to a properly earthed mains socket. Ideally, the microwave
should have its own power circuit.
If you are not sure whether the socket you have selected meets the specifications, please
consult an electrician.
Now heat the microwave once without any food in order to remove any production-related residues in
the cooking space.
• Place a container full of water on the glass plate (2), the container must be suitable for use in the
microwave and grill. Close the door.
• Select grill mode by pressing the “Grill” button (6). The symbol appears in the display (1) and the
time shows “0:10”.
• Use the rotary knob (9) to select a cooking time of 5 minutes and press the Start/Quick Start button
(9). The symbol flashes in the display (1) and the set time counts down.
• After the set cooking time, you will hear 5 beeps, the display (1) flashes “END” and the appliance
automatically switches off.
• Open the door and allow the appliance to cool completely.
When you first use the appliance, production-related residues can cause a slight smell and a
slight built-up of smoke. This is normal and passes quickly. Make sure there is adequate
ventilation! Open a window if necessary.
• Clean the microwave, the glass plate (2) and the roller ring (4) as described in the chapter on
“Cleaning” and then dry everything off thoroughly.
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 321962 SMW 800 E2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 321962 SMW 800 E2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info