750543
21
Zoom out
Zoom in
Previous page
1/88
Next page
19
GB
5. How to use
DANGER! Risk of fire!
~Place the device on a dry, level, non-slip
and heat-resistant surface.
~The device must not be operated close
to flammable liquids or materials, or in
a potentially explosive environment.
Keep at a distance of at least 30 cm
from walls.
NOTE: when in operation for the first time,
some smoke and odour may be generated
by the device. This is related to materials
used on the heating elements during assem-
bly, and is not a defect with the product. En-
sure adequate ventilation.
Remove all packing material.
Check to ensure that all parts are pres-
ent and undamaged.
Clean the device prior to its first
use (see “Cleaning and storage” on
page 20)!
1. Remove any labels or stickers (but not
the type plate on the underside).
2. Turn the temperature regulator3 to “0”.
This switches the heater off.
3. Insert the mains plug8 into an easily
accessible earthed wall socket whose
voltage matches the voltage stated on
the rating plate.
The red indicator light2 comes on.
4. Turn the temperature regulator3 to
MAX.
The temperature indicator light4 lights
up, and the appliance starts to heat up.
Leave the appliance switched on for
around 10 - 15 minutes.
5. Switch the heater off by turning the tem-
perature regulator3 to “0”.
6. Take out the mains plug8 and allow the
appliance to cool down.
7. Clean the appliance again (see “Clean-
ing and storage” on page 20).
6. Operation
DANGER! Risk of injury
through burning!
~The metal surfaces become very hot dur-
ing operation. Only touch the handles
and control elements of the device dur-
ing operation.
6.1 Preparing the appliance,
switching on and off
1. Select a location that is firm, level and
not flammable. Maintain a distance of
approx. 50 cm from other objects.
2. Turn the temperature regulator3 to “0”.
This switches the heater off.
3. Grease the raclette pans9 lightly on the
inside. Lightly grease the top surface of
the grill plate1.
NOTE: Use kitchen paper dipped in a little
cooking oil.
4. Place the grill plate1 on the holders of
the base section6. Ensure that the grill
plate1 is correctly positioned on the
holders.
5. Insert the mains plug8 into an easily
accessible earthed wall socket whose
voltage matches the voltage stated on
the rating plate.
The red indicator light2 comes on.
6. Turn the temperature regulator3 clock-
wise to MAX.
The temperature indicator light4 lights
up, and the appliance starts to heat up.
Allow the appliance heat up for around
10 minutes.
The appliance is now ready to use.
7. To turn the heater off, turn the tempera-
ture regulator3 one notch anticlockwise
towards “0”.
__321565_B8.book Seite 19 Donnerstag, 19. September 2019 8:15 08
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 321565 SRG 1200 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 321565 SRG 1200 B2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info