Manual Silvercrest IAN 113854 (page 16 of 21) (English, German)

642330

Zoom out

Zoom in

1/21

16 GB

Setting up

Preparing the remote

control (ﬁg. A)

1. Open the battery compartment on

the back of the remote control by

pushing away the battery compart-

ment cover

downwards. Insert

two batteries AAA. Make sure you

ﬁt the battery the right way round

(polarity).

2. Press one of the ON / OFF buttons

to test whether the remote

control works; if it does, the power

indicator light will come on

Setting up the remote-

controlled socket

1. Plug the remote-controlled socket

into an earthed household socket.

2. The LED operating status display

will now ﬂash slowly for approx.

30 seconds after plugging in.

3. Aim the remote control at the

remote-controlled socket at a

distance of approx. 50 cm.

4. With the LED operating status dis-

play

ﬂashing, press the desired

ON button of the channel ON /

OFF button

(A, B, C or D) on

the remote control. The LED operat-

ing status display

will now light

continuously. You can now use the

remote control to switch a connect-

ed device on or oﬀ using.

5. Repeat this process with the other

remote-controlled socket.

6. You can use one channel ON/OFF

button

to switch several remote-

controlled sockets at once. You can

further train six remote controls suc-

cessively and use these for a single

receiver. This means you can switch

one appliance on and oﬀ from up

to six diﬀerent places.

7. In this case, synchronise every

remote-controlled socket with the

channel of the remote control.

8. The codes for the remote control

will also remain stored when

changing the batteries.

9. The codes will remain permanently

stored when disconnecting the

remote-controlled socket from the

power supply.

10. Avoid interference: Ensure the vari-

ous remote-controlled sockets are

approx. 50 cm apart.

11. The LED operating status display

indicates if the remote-controlled

socket is in ON/OFF mode.

Deleting a code:

To delete a code, ﬁrst repeat steps

1 – 3.

With the LED operating display

ﬂashing, press the desired OFF

button of the channel ON/ OFF

button

(A, B, C or D) you wish

to delete on the remote control.

The LED operating status display

will ﬂash rapidly for approx. 2 sec-

onds to conﬁrm deletion.

It will then ﬂash slowly again for

approx. 30 seconds and a new

code entered.

113854_silv_Funksteckdosen-Set_Content_DE_AT.indd 16 17.06.15 10:24

Does each packet of plugs work on the same wavelength. I have 2 sets and they all seem to work from one controller. Submitted on 25-9-2018 at 12:18
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 113854 in the language / languages: English, German as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 113854 Manual

Product: