569394
4
Zoom out
Zoom in
Previous page
1/12
Next page
8 GB/IE
Safety / Setting up
J If the device malfunctions, switch it
off immediately.
J These instructions are a component
of the device. If you pass the device
on to a third party, these instructions
must also be handed on.
Q
Advice on use of dimmer
radio-controlled
socket
(FSD B 20-A)
Use the remote-controlled dimmer
socket FSD B 20-A only for the following
lamps:
– 240 V
~
light bulbs 20–280 W
240 V
~
high-voltage halogen bulbs
20–280 W
Do not use the dimmer / remote-controlled
electrical outlet socket for energy-saving
lamps, fluorescent lamps, lamps with
their own dimmers and lamps with
transformers, except for incandescent
and halogen lamps with electronic
transformers (12 V / 20–50 W). Do not
use any other consumers. This may
damage the connected consumers and
the remote-controlled sockets.
Q
Setting up
Q
Preparing the remote
control (FSS B 20-A)
(fig. A)
1. Open the battery compartment on
the back of the remote control by
pushing away the battery compart-
ment cover
4
downwards. Insert a
12 V battery. Make sure you fit the
battery the right way round (polarity).
2. Press one of the ON / OFF buttons
2
or
3
to test whether the remote
control works; if it does, the power
indicator light will come on
1
.
Q
Setting up the remote-
controlled socket
(FSE B 20-A) (fig. B)
1. Insert the remote-controlled socket
into an earthed household socket
and switch it on with the ON / OFF
switch
5
. The LED operating status
display
6
will come on.
2. Point the remote control at the remote-
controlled socket at a distance of
approx. 50 cm.
3. Press the LEARN button
7
of the
remote-controlled socket for ap-
prox. 3 seconds and release it
again. The LED operating status dis-
play
6
will flash for approx. 10
seconds. While it is flashing, press the
desired ON button of the channel
ON / OFF button
2
(A, B, C or D)
of the remote control. The LED op-
erating status display
6
will now
shine permanently. You can now
switch a connected consumer on or
off using the remote control.
4. Repeat this procedure with the other
remote-controlled socket.
5. You can switch several remote-con-
trolled sockets on and off at the
same time using the ON / OFF but-
66538_silv_Funkschaltset_Content_GB-IE.indd 8 29.06.11 11:45
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest 66538 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest 66538 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest 66538

Silvercrest 66538 User Manual - German, Dutch, French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info