664885
53
Zoom out
Zoom in
Previous page
1/54
Next page
Seam
puckering
Patterns are
distorted
1. The needle thread tension is too tight.
2. The needle thread is not threaded correctly.
3. The needle is too heavy for the fabric
being sewn.
4. The stitch length is too long for the fabric.
1. The correct presser foot is not used.
2. The needle thread tension is too tight.
1. Select the correct foot.
2. Loosen the thread tension .
1. Lossen the thread tension.
2. Rethread the machine.
3. Choose a needle to suit the thread and fabric.
4. Make stitch dense.
The sewing
machine
doesn't operate
1. The machine is not turned on.
2. The presser foot lever is raised.
1. Turn on the machine.
2. Lower the presser foot lever.
The machine
jams
Remove the upper thread and bobbin case, turn
the handwheel backwards and forwards by hand
and remove the thread remands.
The
machine is
noisy
1. Fluff or oil have collected on the hook or
needle bar.
3. The needle is damaged.
1. Clean the hook and feed dog as described.
3. Replace the needle.
Uneven
stitches,
uneven feed
1. Poor quality thread.
2. The bobbin case is threaded wrong.
3. Fabric has been pulled.
1. Select a better quality thread.
2. Remove the bobbin case, the thread and
reinsert correctly.
3. Do not pull on the fabric while sewing, let it
be taken up by the machine.
Problem
Cause
Correction
5. Thread is caught in the hook.
4. Slight humming sound coming from
internal motor.
4. Normal.
6. The feed dogs are packed with lint.
Remove the upper thread and bobbin case, turn
the handwheel backwards and forwards by hand
and remove the thread remands.
1. Thread is caught in the hook.
2. The feed dogs are packed with lint.
3. Connect the power line plug to the electric
outlet.
3. The machine is not plugged in.
Page 14
Page 11
Page 7
Page 18
Page 20
Page 14
Page 46
Page 10
Page 7
--
Page 46
Page 7
Page 3
--
Page 16
Page 3
Page 46
Reference
Trouble shooting guide
49
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silver 1035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silver 1035 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info