664888
2
Zoom out
Zoom in
Previous page
1/29
Next page
When using an electrical appliance,
basic safety always be followed,
including the following:
Read all instructions before using this
sewing machine.
To reduce the risk of
electric shock:
1. An appliance should never be left
unattended when plugged in.
2. Always unplug this appliance from
the electric outlet immediately after
using and before cleaning.
3. Always unplug before re-lamping.
Replace bulb with same type rated
10 watts (110-120V area) or 15 watts
(220-240V area).
1. Do not allow to be used as a toy.
Close attention is necessary when
this appliance is used by or near
children.
2. Use this appliance only for its
intended use as described in this
manual. Use only attachments
recommended by the manufacturer
as contained in this manual.
3. Never operate this appliance if it has
a damaged cord or plug, if it is not
working properly, if it has been
dropped or damaged, or dropped
into water. Return the appliance to
the nearest authorized dealer or
service center for examination, repair,
electrical or mechanical adjustment.
4. Never operate the appliance with any
air openings block. Keep ventilation
openings of the sewing machine and
foot controller free from accumulation
of lint, dust, and loose cloth.
5. Keep fingers away from all moving
parts. Special care is required around
the sewing machine needle.
6. Always use the proper needle plate,
The wrong plate can cause the
needle to break.
7. Do not use bent needles.
8. Do not pull or push fabric while
stitching. It may deflect the needle
causing it to break.
9. Switch the sewing machine off ("O")
when making any adjustments in the
needle area, such as threading
needle, changing needle, threading
bobbin, or changing presser foot, and
the like.
10.Always unplug sewing machine from
the electrical outlet when removing
covers, lubricating, or when making
any other user servicing adjustments
mentioned in the instruction manual.
11.Never drop or insert any object into
any opening.
12.Do not use outdoors.
13.Do not operate where aerosol spray
products are being used or where
oxygen is being administered.
14.To disconnect, turn all controls to the
off ("O") position, then remove plug
from outlet.
15.Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
This sewing machine is intended for
household use only.
DANGER
SAVE THESE
INSTRUCTIONS
WARNING To reduce the risk of
burns, fire, electric shock, or injury to
persons:
IMPORTANT SAFETY INSTRUCTIONS
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silver 1002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silver 1002 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info