685065
5
Zoom out
Zoom in
Previous page
1/29
Next page
98
English
English
Never use flammable liquids such as alcohol (including perfumes, sanitizers, or other applications containing
alcohol) or acetone to clean the skin before using Flash&Go™.
Use of Flash&Go™ may cause temporary pigmentation changes (See section 8 -“Risks of Using Flash&Go™”).
Keep this device out of the reach of children. Do not use Flash&Go™ on children or allow children to use it.
7. Reducing the risk of injury
As with any electrical device, certain precautions must be taken in order to ensure your safety when
using Flash&Go™.
Flash&Go™ is an electrical device. As such it should always be kept away from water.
Do not place or store Flash&Go™ where it can fall or be pushed into a tub, sink or any other vessel contain-
ing water. Do not place in, or drop into water or any other liquid.
This may cause severe electrocution.
Do not use Flash&Go™ while bathing.
Do not use Flash&Go™ if it becomes damp or wet.
Do not reach for Flash&Go™ if it has fallen into water.
Unplug Flash&Go™ immediately if it has fallen into water.
Keep Flash&Go™ away from water! Unplug Flash&Go™ immediately if it has fallen into water.
Keep Flash&Go™ away from water!
No modification of this equipment is allowed!
Never open Flash&Go™!
Do not attempt to open or repair your Flash&Go™ device. Opening Flash&Go™ may expose you to
dangerous electrical components and to pulsed light energy, either of which may cause bodily damage and/
or eye injury.
8. Risks of using Flash&Go™
Side eects and complications associated with the use of Flash&Go™ according to its instructions are
uncommon. However every cosmetic procedure, including those designed for home use, involves some degree
of risk. Therefore it is important that you understand and accept the risks and complications that can occur with
pulsed light hair removal systems designed for home use.
Do not attempt to open or repair your Flash&Go™ device. Only authorized
Flash&Go™ repair centers are permitted to perform repairs.
Trying to open Flash&Go™ may also damage the device and will void your warranty.
Please contact Flash&Go™ Customer Service if you have a broken or damaged device in need of repair.
Use Flash&Go™ only for its intended use and as described in its manual.
Flash&Go™ should never be left unattended when plugged into an outlet.
Do not operate Flash&Go™ if it has a damaged cord or plug and keep the power cord away from heated
surfaces.
Do not use Flash&Go™ if you see or smell smoke when it is in use.
Do not use Flash&Go™ if it is not working properly or if it appears damaged.
Do not use Flash&Go™ if the fan vent in its treatment surface is cracked, coming o or missing.
Do not use Flash&Go™ if the Skin Color Sensor is cracked, or broken.
Do not use Flash&Go™ if the outer shell is cracked or coming apart.
Always unplug Flash&Go™ from the electrical outlet immediately after use.
Unplug Flash&Go™ before cleaning.
Do not use Flash&Go™ with any attachments or accessories not recommended by Home Skinovations Ltd.
Flash&Go™ must be operated only with its designated adaptor (for details on the right adaptor to use
please see chapter 14 – “Specifications”)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silkn Flash and Go Express at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silkn Flash and Go Express in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info