656635
7
Zoom out
Zoom in
Previous page
1/18
Next page
12 13
5.2 Settings relevant to training
in the Quick Menu
If you want to make more training-relevant
settings before starting, such as calibration of
the altitude, press the PLUS button and hold
down to reach the Quick Menu. The following
settings can be configured:
a. Current activity
This item appears when you start a training. This lets you see all important values
on your ROX GPS 11.0 during the trip.
b. Calibrating the altitude IAC+
The ROX GPS 11.0’s altitude measurement is determined on the basis of the
barometric air pressure. Any change to the weather means a change in the air
pressure, which can lead to a change in your current altitude. To compensate
these changes in air pressure, you must enter a reference altitude into the
ROX GPS 11.0 (process known as calibration).
The ROX GPS 11.0 offers three types of calibration (only one has to be used):
1. Home altitude 1–3
The home altitude is the altitude of your start location.
You can set three different home altitudes.
2. Current altitude
The current altitude is the altitude at your current location. The current altitude is
used if you are out on your bike and altitude information is provided.
3. Air pressure at sea level
If you are at an unknown altitude, you can enter the “air pressure reduced to sea
level” to calculate the current altitude. The air pressure reduced to sea level can be
found online (e.g. www.meteo24.de), in the daily newspaper, or at airports.
4. GPS calibration
If you do not have a reference point or any indication of your current altitude,
you can determine this by means of GPS. The accuracy of the displayed altitude
depends on the GPS receiver and is shown in the display (e.g. +/-10m).
c. Selection of the sport profile
If you have accidentally selected the wrong sport profile, you can change this
again here. This is only possible as long as the training has not been started.
d. Load track
A track can be loaded here at any given time.
e. Same track back
This option returns you to the same, already travelled path.
f. Workout
You can also select and start a workout defined by you during the training
session. The workout starts automatically as soon as you have selected it.
g. Strava live segments
Here you can find your Strava segments or disable Strava.
h. Auto pause
You can start training as soon as you have pressed Start. The ROX GPS 11.0
waits till it can detect a speed over 2.2 km/h to begin recording the training.
From then on, the activated Auto Pause function ensures that the training time
pauses for speeds of less than 2.2 km/h (“Auto Pause” appears on the display)
and restarts at speeds of over 2.2 km/h (Auto Start).
i. Alarms
Here, during the training, you have the option of activating or deactivating the
alarms you have defined.
j. Automatic lap
You have the option in the settings to choose among the criteria distance,
time or calories. If you have chosen, for example, 5 km for an Automatic Lap,
a lap is always saved automatically after 5 km. This can be analysed in detail in
the DATA CENTER.
EN
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sigma ROX GPS 11.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sigma ROX GPS 11.0 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sigma ROX GPS 11.0

Sigma ROX GPS 11.0 User Manual - German - 18 pages

Sigma ROX GPS 11.0 User Manual - Dutch - 18 pages

Sigma ROX GPS 11.0 User Manual - French - 18 pages

Sigma ROX GPS 11.0 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info